Fujitsu DL6400 Space Backspace Carriage return Elite characters on, Set line spacing to 7/72 inch

DL6400/6600 Book Page 19 Friday, July 31, 1998 11:42 AM

IBM Proprinter XL24E Emulation

Table B–3 Printer commands for the IBM Proprinter XL24E emulation (Continued)

Function	Command
Condensed characters on	SI or ESC SI
Condensed and elite characters off	DC2
Subscript or superscript printing on	ESC S (n)
(subscript: n = 1, superscript: n = 0)	ESC T
Subscript and superscript printing off
Underline on or off (on: n = 1, off: n = 0)	ESC - (n)
Overline on or off (on: n = 1, off: n = 0)	ESC_(n)
Horizontal Control
Space	SP
Backspace	BS
Carriage return	CR
Elite characters on	ESC :
Proportionally spaced characters on or off	ESC P (n)
(on: n = 1, off: n = 0)
Vertical Control
Line feed	LF
Form feed	FF
Advance paper n/216 inch (1 ≤ n ≤ 255)	ESC J (n)
Advance paper n/180 inch (in AG mode) (1 ≤ n ≤ 255)	ESC J (n)
Set line spacing to 1/8 line	ESC 0
Set line spacing to 7/72 inch	ESC 1
Set line spacing to n/216 inch (0 ≤ n ≤ 255)	ESC 3 (n)
Set line spacing to n/180 inch (in AG mode) (0 ≤ n ≤ 255)	ESC 3 (n)
Preset line spacing to n/72 inch (1 ≤ n ≤ 255)	ESC A (n)
Preset line spacing to n/60 inch (in AG mode) (1 ≤ n ≤ 255)	ESC A (n)
Set line spacing to 1/6 inch or to the value	ESC 2
preset by line spacing command ESC A (n)
Change graphics line spacing base to	ESC [ \ (m1) (m2)
1/216 or 1/180 inch (for ESC J and ESC 3)	(t1) ... (t4)
m1 = 4, m2 = 0		COMMAND
0 ≤ t1 ≤ 255, 0 ≤ t2 ≤ 255, t3 = 0, t4 = 180 or 216		SETS

User’s Manual B-19