Fujitsu DL6400 manual Changing print font, quality, and pitch temporarily

#E_AppendixE Page 9 Wednesday, September 2, 1998 10:05 AM

Getting Acquainted with the Control Panel

Important:

Resetting the printer resets the following:

•Line buffer data

•Input buffer data

•Mechanical positions

•Top-of-form position

The following remain in effect:

•Menu 1 or 2 settings; print font, quality, and pitch; and lock on or off as set by the control panel

•LOAD ADJ function settings specified in setup mode

•Downloaded data

Changing print font, quality, and pitch temporarily

You can temporarily change the print font, quality, and pitch from the power-on defaults settings. Any changes you make are active until the power is turned off. (Use setup mode to change the settings permanently.)

To change print font, quality, and pitch temporarily:

<Font>↓	<Qual>↓	<Pitch>↓
COUR 10	LETTER	10 CPI

1.Press NEXT DISPLAY repeatedly until the menu shown at the right appears.

The bottom line displays abbreviations of the cur- rent font, quality, and pitch settings. In the menu shown here, the current settings are

•Courier 10 font

•Letter-quality print

•10 characters per inch cpi

2.Look at the arrows displayed in the top line of the display. If an arrow point up, press ↓↑ to reverse it. In the following steps, it is assumed that the ar- rows point down.

USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-9