Fujitsu DL6400 manual Parts do not separate or, Become misaligned easily, Misaligned

DL6400/6600 Book Page 3 Friday, July 31, 1998 11:42 AM

Continuous Forms

3. Characteristics of paper with the number of parts in brackets [ ] may differ slightly with the manufacturer and should be tested carefully before use.

4.Paper used for continuous forms differs depending on whether it is loaded from the front or from the back of the printer. The paper specifications in Table 7-1 are for forms loaded from the front.

5.The total thickness of multipart paper must not exceed 0.65 mm (0.025 in).

3.Binding

Select a binding type from Table 7-2.

Table 7–2 Binding for continuous forms with two to six parts

Binding Remarks

Double-sided glued multipart	Recommended because:
forms (zigzag spot gluing)	• Forms remain flexible.
lessorin)(1mm25.4	• Parts do not separate or
	become misaligned easily.
Double-sided paper staples	The more parts, the easier the
	parts separate or become
76.2 mm (3 in) or less	misaligned.

PAPER SPECIFICATIONS

User’s Manual 7-3