Fujitsu DL6400 manual Cover open Cover is open Shut the cover Error, LCD model

#E_AppendixE Page 28 Wednesday, September 2, 1998 10:05 AM

Messages

Table E–3 Operational error list (Continued)

No.	Error name	Error description	Recovery method
2	Cut sheet	Cut sheet feeder	• Remove jammed
	feeder error	paper end or paper	paper.
		jam is detected.(*2)	• Insert cut sheets
			and load them.

Notes: *1. DL6400 has a paper end detection sensor to detect paper end (Paper end is not detected, unless the setup item PPR-OUT: IGNORE is set.)

*2. Cut sheet feeder error is detected during paper loading.

2.If the following error occurs, the alarm buzzer sounds. All switches on the control panel are disabled.

Table E–4 Operational error list

No.	Error name	Error description	Recovery method
1	Cover open	Cover is open.	• Shut the cover.
	error

LCD model

An operational error message indicates a problem you can correct immediately. Printing stops after the current line, and the following occurs:

•The ALARM indicator turns red.

•The printer goes offline.

•The alarm sounds (unless it was deactivated in setup mode).

The printer remains offline until the error is corrected. The operational error message appears in the upper line of the display, the lower line retains the previous contents. For example, the display appears as follow when a paper outage is detected during a form feed or line feed.

Out of paper

feed paper feed

E-28 User’s Manual