Fujitsu DL6400 manual Setting Required Options, MENU1 Emulate

DL6400/6600 Book Page 10 Friday, July 31, 1998 11:42 AM

Setting Required Options

Setting

Required

Options

The sections “Changing MENU1 and MENU2 Options” on page 8-11 to “Changing Configuration Options“ on page 8-32 list the default settings for options by function and tell how to change the settings.

Menu 1 settings (MENU1)

Menu 2 settings (MENU2)

Hardware settings (HARDWRE)

Print adjustment settings (ADJUST)

Configuration settings (CONFIG)

Head gap adjustment (GAP-ADJ)

Most selectable options simply change print features such as the type face and page format. Some options, however, must be selected correctly for the printer to work properly with hardware and software. Table 8-2 lists these options.

Table 8–2	Required options
Function	Item	Options
MENU1	EMULATE	The emulation selected for the printer
		and software must match. The
		emulation selected at printer setup (see
		Chapter 2, “Setting Up the Printer”)
		need not be changed unless you want
		to switch to a different emulation. The
		emulation assigned to MENU1 is the
		default setting when the printer is
		turned on.
		See “Changing MENU1 and MENU2
		Options” on page 8-11.
MENU2	None	If MENU2 is used, the selected
		emulation must match that of the
		software.
		See “Changing MENU1 and MENU2
		Options” on page 8-11.

8-10 User’s Manual