Fujitsu DL6400 manual Replacing the Subcassette, Lift the reverse guide and remove the old ribbon

DL6400/6600 Book Page 6 Friday, July 31, 1998 11:42 AM

Replacing the Subcassette

Replacing the Subcassette

☞

The ribbon can be replaced up to five times before the entire ribbon cassette itself must be replaced.

Notice:

A Fujitsu ribbon cassette is recommended. Other cassettes may cause operating problems or damage the print head. Fujitsu takes no responsibility for print head faults caused by such cassettes. Replace the cassette carefully to avoid getting ink on your hands.

Replace the ribbon as follows:

1.Turn off printer power (❍).

2.Remove the ribbon cassette from the printer as explained in “Removing the Ribbon Cassette” on page 3-5.

3.Sequentially press each of the four lock tabs A in the directions of the arrows, starting from either end. Then open the cassette lid.

Lock tabs A

Lid

4.Press feed roller A in the direction of the arrow until it clicks into place. This procedure loosens the ribbon holder.

Reverse guide

Feed roller A

5. Lift the reverse guide and remove the old ribbon.

3-6 User’s Manual