Fujitsu DL6400 manual Lists the printer parts and functions, Or continuous forms width

DL6400/6600 Book Page 5 Friday, July 31, 1998 11:42 AM

Parts and Functions

INTRODUCTION

Table 1-1 lists the printer parts and functions.

Table 1–1 Printer parts and functions

Number	Part	Function
q	Top cover	Protects the print head and other internal printer
		components.
w	Back cut-sheet guides	Guides paper into the printer. Set based on the cut-sheet
		or continuous forms width.
e	Paper guide	Set down for continuous forms and up for cut sheets.
r	Paper cutter	Cuts continuous forms.
t	Platen knob	Turned to feed paper manually.
y	Control panel	Contains the switches and status lamps used to operate
		the printer.
u	Cut-sheet tray	Supports cut sheets during feeding.
i	Front tray	Holds cut sheets for insertion into the printer. Open for
		cut sheets and closed for continuous forms.
o	Front cut-sheet guide	Set based on the cut-sheet width to guide paper into the
		printer.
!0	Power switch	Set to "" to turn power on and to "❍" to turn power
		off. When power is on, the power lamp is on.
!1	Front cover	Protects components inside the printer. Opened to
		replace continuous forms.
!2	Back auxiliary cover	Protects components inside the printer. Opened to
		replace continuous forms.
!3	Power cord connector	Power cord connection.
!4	Interface cable	Cable connection between the printer and processor.
	connector
!5	Cut-sheet feeder	Cable connection between the printer and the optional
	connector	cut-sheet feeder.
!6	Back cover	Removed when the optional cut-sheet feeder is installed.

User’s Manual 1-5