Fujitsu DL6400 manual Fatal

#E_AppendixE Page 34 Wednesday, September 2, 1998 10:05 AM

Messages

LCD model

Fatal errors other then “Jam lever open” cannot be corrected. Fatal errors include serious mechanical or electrical problems that prevent the printer from operating. Printing stops immediately, and the following occurs:

•The ALARM indicator blinks red.

•The ONLINE indicator turns off (the printer goes offline).

•An alarm sounds.

A fatal error message cannot be cleared. Usually, the printer does not restart. When a fatal error occurs, call your repair service. The upper line of the display shows FATAL! For example, the display appears as follows if the voltage is too low for printer operation.

FATAL!

Low voltage

The fatal error messages are listed here alphabetically.

•CSF motor driver

•Fan doesn't work

•Jam lever open (To correct, turn off power, close the jam lever, and turn power back on.)

•Left end sensor

•LF motor driver

•Low voltage

•Overload

•Paper too thick

•Print head driver

•RAM read/write

•Resident ROM sum (The ALARM indicator does not light and an alarm does not sound.)

•Ribbon motor driver

•SP motor driver

E-34 User’s Manual