Fujitsu DL6400 manual MICRO↑ Exit Save, Speed Incr Decr

#E_AppendixE Page 26 Wednesday, September 2, 1998 10:05 AM

Messages

Table E–2	Printer status messages (Continued)
Message		Meaning
Tear off paper and press any		This message appears when Tear off
button		paper is selected from the control
		panel. After tearing off the
		continuous forms, press any button
		on the control panel to retract the
		paper to the top-of-form.
TOP ADJ: xx/6 IN + xx/180		This message appears for 7 seconds
MICRO↑ EXIT SAVE		when the printer loads paper while
		offline. It indicates the top-of-form
		(line 001) position from the top
		edge of the paper by the sum of a
		multiple of 1/6 inch and a multiple
		of 1/180 inch. You can adjust the
		top-of-form by using ↓↑ and F1
		while this message is displayed.
		Press F2 to save the setting
		temporary. Press F3 to save the
		setting permanently.
Vertical alignment: xx		The printer is printing the vertical
SPEED	INCR DECR	bar pattern used to check alignment
		between forward and backward
		printing. Press F1 to change print
		quality (speed). Press F2
		(increment) and F3 (decrement) to
		adjust the alignment of forward
		printing. To stop printing, press the
		ONLINE or NEXT DISPLAY
		button.

E-26 User’s Manual