Fujitsu DL6400 manual Changing, Hardware

DL6400/6600 Book Page 24 Friday, July 31, 1998 11:42 AM

Changing Hardware Options

Changing	HARDWRE defines printer hardware conditions. If you are using the
Hardware	optional RS-232C serial interface, serial interface options must be set
Options	correctly for the printer to function with system hardware.
	Table 8-4 lists HARDWRE items and options in the order they are
	printed. The procedure for changing hardware options follows
	Table 8-4.
	Table 8–4	HARDWRE options
HARDWRE item	Options	Description
<PPR-OUT>		Specifies how the printer responds to a paper outage.
	CNTONLY	The printer detects paper outage only for continuous
		forms. Printing stops, and the PAPER OUT indicator (or
		ALARM indicator) glows amber.
	DETECT	The printer detects paper outage for both continuous
		forms and cut sheets. Printing stops, and the PAPER
		OUT indicator (or ALARM indicator) glows amber.
	IGNORE	The printer ignores paper outage for both continuous
		forms and cutsheets. Printing continues until no more
		data remains. No PAPER OUT (or ALARM) warning
		occurs.
		Note:
		For cut-sheet feeders, printing stops, and the PAPER
		OUT (or ALARM indicator) indicator glows amber,
		regardless of the <PPR-OUT> setting.
<PRT-DIR>	BI-DIR	The printer performs bidirectional printing in both
		directions while seeking the next print direction, this
	UNI-DIR	option is used for a shorter print time.
		The printer performs unidirectional printing. This feature
		is useful for printing vertical lines in tables even if vertical
		alignment is not adjusted. Printing is slower than
		bidirectional printing.
<BUZZER>		Enables or disables the printer status buzzer.
	ON	Buzzer is on. This setting is recommended. The printer
		beeps to indicate paper outages and other conditions.
	OFF	Buzzer is off.

8-24 User’s Manual