Fujitsu DL6400 manual Using Setup, Mode

DL6400/6600 Book Page 4 Friday, July 31, 1998 11:42 AM

Using Setup Mode

Using Setup			Entering setup mode prints the <<FUNCTION>> menu.
Mode
<<FUNCTION>>
SAVE&END	MENU1	MENU2 HARDWRE ADJUST		CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT	GAP-ADJ		(GAP-ADJ is printed only with APTC installed.)
			Table 8-1 summarizes the setup mode functions.
			Table 8–1 Setup mode functions
			Function	Purpose
			SAVE&END	Exits setup mode and saves changes made in
				setup mode.
			MENU1 and	Assigns print features to MENU1 and
			MENU2	MENU2 on the control panel.
			HARDWRE	Changes hardware options.
			ADJUST	Changes print adjustment options.
			CONFIG	Changes configuration options.
			GAP-ADJ	Sets the head gap, and is displayed when the
				printer is equipped with the APTC function.
			DEFAULT	Resets MENU1 and MENU2 default values
				set at shipment.
			LIST	Prints all currently selected options.
			SELF-TST	Run the self-test.
			HEX-DUMP	Prints hexadecimal data dumps.
			V-ALMNT	Checks and corrects vertical printing
				alignment.

To select a function from the <<FUNCTION>> menu, do the following:

1.Repeatedly press LOCK to position the yellow arrow on the print head beneath the required function.

2.Press FONT or MENU to select a function. If the function has items and options, the printer prints the first item and its options.

8-4 User’s Manual