Fujitsu manual DL6400/6600 Book Page 35 Friday, July 31, 1998 1142 AM

DL6400/6600 Book Page 35 Friday, July 31, 1998 11:42 AM

Changing Configuration Options

To change printer configuration options, check that continuous forms are loaded. Then do the following:

1.Enter setup mode.

Place the printer offline and then press FONT and MENU simultaneously. Wait for the printer to stop printing and check that the <<FUNCTION>> menu is printed.

<<FUNCTION>>
SAVE&END	MENU1 MENU2	HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT	GAP-ADJ	(GAP-ADJ is printed only with APTC installed.)

2.Select CONFIG.

Repeatedly press LOCK to position the yellow arrow on the print head beneath CONFIG. Press FONT to select the CONFIG function and print the <TEAROFF> options.

<TEAROFF> MANUAL AUTO

3.Select an option.

Press LOCK to move the yellow arrow to select an option. Press FONT to select the option and print the next item.

Important:

To print the previous item, press MENU.

4.Exit CONFIG.

Press ONLINE and reprint the <<FUNCTION>> menu.

5.Either select another function or exit setup mode, saving changes.

To exit setup mode and save changes, check that the yellow arrow on the print head is positioned beneath SAVE&END. Then press FONT or MENU.

SETUP MODE

User’s Manual 8-35