Fujitsu DL6400 manual Exit Stop GO

#E_AppendixE Page 25 Wednesday, September 2, 1998 10:05 AM

			Messages
Table E–2		Printer status messages (Continued)
	Message		Meaning
	Online setup mode		This message appears when a
			computer command places the
			printer in setup mode. It is the
			opening message of online setup
			mode. Printer status information
			appears in the lower line of the
			display.
	Page length = xx.x inch		This message appears briefly when a
			form feed is executed. It indicates
			the length of paper moved per form
			feed.
	Paper still remains		When unloading continuous forms,
			paper was not retracted all the way
			to the tractor. Tear off the
			continuous forms.
	Printing		The printer is online and printing.
	RESET: Are you sure?		The printer is ready to reset itself.
	No	Yes	Press F3 to reset the printer. The
			buffer is cleared.
	Save top adjust now!		This message briefly appears when
			the adjusted top-of-form position is
			permanently saved in the printer.
			Line 001 is set at the current
			position on the page.
	Self-test printing		The printer is printing or ready to
	EXIT STOP GO		print its self-test pattern, used to
			check print quality. Press F1 to exit
			the self-test. Press F2 to pause
			printing. Press F3 to start or restart
			printing.
	Setup values listing		The printer is printing a page
			listing its currently set default
			values.

USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-25