Fujitsu DL6400 manual Bars offset to the left

DL6400/6600 Book Page 43 Friday, July 31, 1998 11:42 AM

Using Diagnostic Functions

the bars are aligned. If the bars are offset to the right, repeatedly press MENU until they are aligned.

The first line in the following example is assumed to be printed from left to right:

Bars offset to the left Bars offset to the right

4.Adjust vertical alignment at correspondence speed.

Press LOCK to switch from letter speed to correspondence speed. Check the bars and adjust as in step (3).

5.Adjust vertical alignment at draft speed.

Press LOCK to switch from report speed to draft speed. Check the bars and adjust as in step (3).

6.Exit V-ALMNT.

Press ONLINE to exit V-ALMNT and save the new vertical alignment settings. The printer exits setup mode and goes back online.

SETUP MODE

User’s Manual 8-43