Fujitsu DL6400 manual Sound bell, Bel, Enable paper-out sensor, Ignore the paper-out sensor

DL6400/6600 Book Page 14 Friday, July 31, 1998 11:42 AM

Fujitsu DPL24C PLUS

	Table B–1	Printer commands in the DPL24C PLUS command set (Continued)
Function			Command
Miscellaneous
Sound bell			BEL
Enable paper-out sensor			ESC 9
Ignore the paper-out sensor			ESC 8
Typewriter mode on or off			ESC i (n)
(on: n = 1, off: n = 0)
Move print head to home position			ESC <
Unidirectional printing on or off			ESC U (n)
(on: n = 1, off: n = 0)
Select CR code definition			ESC e r (n)
n =	0: CR = CR only
	1: CR = CR + LF		ESC e l (n)
Select LF code definition
n =	0: LF = LF only
	1: LF = LF + CR
Enter online setup mode			ESC e ONLINE (data)
Move print head (unit: 1/180 inch)			ESC e h (n1) (n2)
(0 ≤ n1 ≤ 255) (0 ≤ n2 ≤ 255)
Message display on LCD*2			ESC e M (n ) (n	) D ...D	n
Message display time control*2			1 2	1
			ESC e W (n1) (n2)

*1 The A.P.T.C control command is available only for a printer with the APTC feature. *2 This command is available only for a printer with the LCD control panel.

B-14 User’s Manual