Fujitsu DL6400 manual Lock, Setup, All, Cont-Pe, Tractor, Edge

DL6400/6600 Book Page 34 Friday, July 31, 1998 11:42 AM

Changing Configuration Options

Table 8–6 CONFIG options (Continued)

CONFIG item	Options	Description
<LOCK>	NOTE	Lock function of setup mode.
		Enables all buttons on the control panel.
	SETUP	Disables the setup-related buttons to keep the printer from
		entering setup mode during the offline state.
	ALL	Disables the setup-related buttons and the LOCK, FONT,
		and MENU buttons.
<//S//>		Effectiveness of the Cut Sheet Feed Selection command
	DISABLE	(//S//)
		Makes the command ineffective.
	ENABLE	Makes the command effective.
		Note: The Cut Sheet Feed Selection command (//S//)
		changes the paper source to the paper table and waits for
		manual insertion of a cut sheet.
<CONT-PE>		Detects the end of continuous forms.
	TRACTOR	Paper end is detected by the sensor.
		Paper-end unprinted area:
		Front feeding continuous forms: About 31 mm
		Rear feeding continuous forms: About 88 mm
	EDGE	Regardless of paper end, printing continues near the edge
		of paper.
		Paper-end uprinted area:
		Front feeding continuous forms: About 4.2 mm
		Rear feeding continuous forms: About 8.5 mm
<==END==>		Indicates the end of the CONFIG item list. Press FONT
		to print the first item, <TEAROFF>. Press MENU to
		print the previous item, <CONT-PE>. Press ONLINE to
		reprint the <<FUNCTION>> menu.

Note:

Underlined options are the factory defaults settings.

8-34 User’s Manual