Source Setup

1

2

3

4 Setup5

Items can be set individually for each input selector.

Preparation

Press the input selector buttons to select an input source.

Menu

Source Setup

Audyssey®

The tone for each speaker is set automatically by Audyssey 2EQ® Room Correction and Speaker Setup. To enable the following settings, you must first perform the Room Correction and Speaker Setup (page 30).

These technologies cannot be used when:

a pair of headphones is connected, or

either Pure Audio (European and Australian models) or Direct listening mode is selected.

Audyssey

`Off

`Movie:

Select this setting for movie material.

The Audyssey indicator will light.

`Music:

Select this setting for music material.

The Audyssey indicator will light.

Note

When “Audyssey Quick Start” has been used for measurement, “Audyssey” cannot be selected.

Audyssey equalizing does not work with DSD sources.

Dynamic EQ

`Off

`On:

Audyssey Dynamic EQ® becomes active. The Dynamic EQ indicator will light.

With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels.

Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct frequency response and surround volume levels moment-by-moment so that the content sounds the way it was created at any volume level — not just at reference level.

Reference Level

Audyssey Dynamic EQ Reference Level Offset

`0dB:

This should be selected for movie contents.

`5dB:

Select this setting for content that has a very wide dynamic range, such as classical music.

`10dB:

Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected for TV content as that is usually mixed at 10 dB below film reference.

`15dB:

Select this setting for pop/rock music or other program material that is mixed at very high listening levels and has a compressed dynamic range.

Movies are mixed in rooms calibrated for film reference. To achieve the same reference level in a home theater system each speaker level must be adjusted so that

–30 dBFS band-limited (500 Hz to 2000 Hz) pink noise produces 75 dB sound pressure level at the listening position. A home theater system automatically calibrated by Audyssey 2EQ will play at reference level when the master volume control is set to the 0 dB position. At that level you can hear the mix as the mixers heard it.

En-49

Advanced Operations

Audyssey Dynamic EQ is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB. However, film reference level is not always used in music or other non-film content.

Audyssey Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard.

Note

If “Dynamic EQ” setting is set to “Off”, this technology cannot be used.

Dynamic Volume

`Off

`Light:

Activates Light Compression Mode.

`Medium:

Activates Medium Compression Mode.

`Heavy:

Activates Heavy Compression Mode. This setting affects volume the most. It quiets the loud parts, such as explosions, and boosts the quiet parts so they can be heard.

Note

If you make Dynamic Volume active, “Dynamic EQ” is set to “On”. The Dynamic Vol indicator will light.

When “Dynamic EQ” is set to “Off”, “Dynamic Volume” is automatically switched to “Off”.

Page 49
Image 49
Onkyo HT-R758 instruction manual En-49, Source Setup, Reference Level

HT-R758 specifications

The Onkyo HT-R758 is a powerful home theater receiver designed to elevate your audio and visual experience to new heights. Featuring a robust 7.2 channel amplifier, it delivers an impressive total output of 100 watts per channel, ensuring that whether you’re watching movies, playing games, or listening to music, you enjoy a rich, immersive sound.

One of the standout features of the HT-R758 is its support for Dolby Atmos and DTS:X. These advanced audio technologies create a three-dimensional sound field, allowing sound to move around you in a natural and lifelike manner. This makes it particularly effective during action-packed movie scenes or dynamic soundtracks, enhancing your viewing experience.

The receiver is also equipped with a variety of connectivity options, including six HDMI inputs and two HDMI outputs, all supporting 4K video and HDCP 2.2. This makes it easy to connect multiple devices like Blu-ray players, gaming consoles, and streaming devices while ensuring that you can enjoy high-definition video quality without compromise.

In addition to HDMI support, the HT-R758 features built-in Wi-Fi and Bluetooth capabilities, enabling seamless wireless streaming from your favorite music services like Spotify, Pandora, and Apple Music. You can also connect your smartphone or tablet directly, allowing for easy access to your personal music libraries or playlists.

Another notable characteristic of the HT-R758 is its AccuEQ room calibration technology. This automated setup feature analyzes your room's acoustics and adjusts the receiver's settings to provide optimal sound quality regardless of your room's shape or size. This means you can sit back and enjoy perfectly balanced audio without extensive manual tweaking.

Furthermore, the Onkyo HT-R758 boasts a user-friendly interface with an intuitive on-screen setup wizard, making it accessible even for those who may not be tech-savvy. The remote control is designed for easy navigation and management of your home theater system from the comfort of your couch.

In summary, the Onkyo HT-R758 is a versatile and feature-packed home theater receiver that caters to both audio enthusiasts and casual users alike. With its ability to deliver stunning sound quality, extensive connectivity options, and user-friendly design, it stands out as a great option for anyone looking to create an exceptional home entertainment system.