Changing the Input Display
When you connect an
This setting can be done only from the front panel.
1 Press TV/CD or GAME.
“TV/CD” or “GAME” appears on the AV receiver’s display.
2 Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input display.
■TV/CD: TV/CD → DOCK
→TAPE →
■GAME: GAME ↔ DOCK
“
Note
•“DOCK” can be selected for the “TV/CD” or “GAME” input selector, but not at the same time.
•Enter the appropriate remote control code before using the remote controller for the first time (➔ page 59).
Using the Music Optimizer
The Music Optimizer function enhances the sound quality of compressed music files.
1 (North American models) Press MUSIC OPTIMIZER on the front panel.
The M.Opt indicator lights on the AV receiver’s display.
The MUSIC OPTIMIZER indicator lights on the front panel.
Tip
•Alternatively, you can use Q SETUP on the remote controller.
•See “Music Optimizer” for more details (➔ page 43).
Muting the AV Receiver
You can temporarily mute the output of the AV receiver.
1 Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator flashes on the AV receiver’s display.
Tip
•To unmute, press MUTING again or adjust the volume.
•Muting is automatically cancelled when the AV receiver is set to standby.
Turning On & Basic Operations
Using Headphones
1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES jack.
While the headphones plug is inserted in the PHONES jack, =indicator lights.
Note
•Always turn down the volume before connecting your headphones.
•While the headphones plug is inserted in the PHONES jack, the speakers are turned off.
•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, Direct, or Pure Audio (European and Australian models).
•If you connect an iPod or iPhone to the USB port on the AV receiver, no sound will be output from the headphones jack.