Setting the Incoming Digital Signal (Fixed Mode)

Fixed Mode

`Off:

The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead.

`PCM:

Only 2-channel PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will flash and noise may also be produced.

`DTS:

Only DTS (but not DTS-HD) format input signals will be heard. If the input signal is not DTS, the dts indicator will flash and there will be no sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected in the “Audio Selector” setting, you can then specify the signal type in “Fixed Mode”.

Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS.

If the beginnings of tracks from a PCM source are cut off, try setting the format to PCM.

If noise is produced when fast forwarding or reversing a DTS CD, try setting the format to DTS.

Note

The setting will be reset to “Off” when you change the setting in “Audio Selector” (page 50).

Hardware

1

2

3

4 Setup5

Menu

Hardware

OSD

Volume OSD

`On

`Off

Turn this setting on to display the volume level on the TV screen while it is adjusted.

Remote ID

Remote ID

`1, 2, or 3

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from other components, you can change its remote ID from “1”, to “2” or “3”.

Note

If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the remote controller’s ID

1

While holding down RECEIVER, press and hold

 

down Q SETUP until the remote indicator lights

 

(about 3 seconds).

2

Use the number buttons to enter ID 1, 2, or 3.

The remote indicator flashes twice.

Advanced Operations

Tuner

AM/FM Freq Step (North American models)

`10kHz/200kHz:

`9kHz/50kHz:

Select the frequency step according to your area.

AM Freq Step (European and Australian models)

`10kHz:

`9kHz:

Select the frequency step according to your area. For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area.

Note

• When this setting is changed, all radio presets will be deleted.

Auto Standby

Auto Standby

`Off

`On

When “Auto Standby” is set to “On”, the ASb indicator lights and the AV receiver will automatically enter standby mode if there is no operation for 30 minutes with no audio and no video signal input.

Auto Standby” will appear on the AV receiver’s display and OSD 30 seconds before the Auto Standby comes on. Default setting: On (European and Australian models),

Off (North American models)

Note

Set to “On”, the Auto Standby function may activate itself during playback with some sources.

The Auto Standby function does not work when Zone 2 is on.

En-51

Page 51
Image 51
Onkyo HT-R758 instruction manual En-51, Hardware

HT-R758 specifications

The Onkyo HT-R758 is a powerful home theater receiver designed to elevate your audio and visual experience to new heights. Featuring a robust 7.2 channel amplifier, it delivers an impressive total output of 100 watts per channel, ensuring that whether you’re watching movies, playing games, or listening to music, you enjoy a rich, immersive sound.

One of the standout features of the HT-R758 is its support for Dolby Atmos and DTS:X. These advanced audio technologies create a three-dimensional sound field, allowing sound to move around you in a natural and lifelike manner. This makes it particularly effective during action-packed movie scenes or dynamic soundtracks, enhancing your viewing experience.

The receiver is also equipped with a variety of connectivity options, including six HDMI inputs and two HDMI outputs, all supporting 4K video and HDCP 2.2. This makes it easy to connect multiple devices like Blu-ray players, gaming consoles, and streaming devices while ensuring that you can enjoy high-definition video quality without compromise.

In addition to HDMI support, the HT-R758 features built-in Wi-Fi and Bluetooth capabilities, enabling seamless wireless streaming from your favorite music services like Spotify, Pandora, and Apple Music. You can also connect your smartphone or tablet directly, allowing for easy access to your personal music libraries or playlists.

Another notable characteristic of the HT-R758 is its AccuEQ room calibration technology. This automated setup feature analyzes your room's acoustics and adjusts the receiver's settings to provide optimal sound quality regardless of your room's shape or size. This means you can sit back and enjoy perfectly balanced audio without extensive manual tweaking.

Furthermore, the Onkyo HT-R758 boasts a user-friendly interface with an intuitive on-screen setup wizard, making it accessible even for those who may not be tech-savvy. The remote control is designed for easy navigation and management of your home theater system from the comfort of your couch.

In summary, the Onkyo HT-R758 is a versatile and feature-packed home theater receiver that caters to both audio enthusiasts and casual users alike. With its ability to deliver stunning sound quality, extensive connectivity options, and user-friendly design, it stands out as a great option for anyone looking to create an exceptional home entertainment system.