Canon ELURA60, ELURA65 Using Headphones during Recording, Recording with an External Microphone

Using Headphones during Recording

The headphones terminal also serves as AV terminal. Headphones can only be used when "H" is displayed on the screen. If not, change the setting following the

procedure below.

CAMERA PLAY (VCR)

CARD CAMERA CARD PLAY

( 38)

VCR SETUP

AV/PHONES ••AV

E

Open the menu and select [VCR SETUP]. Select [AV/PHONES H ], set it to [PHONES H ] and close the menu.

Adjusting the Headphone Volume

CAMERA	PLAY (VCR)	CARD CAMERA	CARD PLAY
AUDIO SETUP		HVOLUME•••••

( 38)

Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the volume with the SET dial and close the menu.

You can turn off the volume completely by turning the SET dial down until [OFF] appears. Turn the SET dial up to increase the volume again.

Recording with an External Microphone

You can attach a commercially available microphone or the optional DM-50 Directional Stereo Microphone to the accessory shoe. Refer also to the instruction manual of the microphone.

1. Attach the microphone to the accessory shoe.

2. When using a commercially available microphone, connect it to the MIC terminal.

❍When recording in silent places, the built-in microphone may pick up the

motor noise of the camcorder. In such case, we recommend using an external microphone.

❍When using a commercially available microphone:

-Use a microphone with built-in power supply (condenser microphone). Almost all stereo microphones with a plug diameter of 0.14 in. (3.5 mm) can be connected. The audio level may differ from that of the built-in microphone.

-Long microphones may appear on the screen.

Recording	Advanced
	Functions -

61