Playback

Problem

Cause

Solution

 

 

 

 

 

 

Pressing the playback

Camcorder is turned off, or is

Set the camcorder to PLAY

32

button does not start

not set to PLAY (VCR) mode.

(VCR) mode.

 

 

playback.

Cassette is not loaded.

Load a cassette.

16

 

 

 

 

 

 

Tape reached the end (b

Rewind the tape.

32

 

flashes on the screen).

 

 

 

Image will not appear

[AV/PHONESH] is set to

Set [AV/PHONESH] to [AV] in

35

on the TV screen.

[PHONESH] in the menu.

the menu.

 

 

 

[AV \ DV OUT] is set to

Set [AV \ DV OUT] to [OFF].

87

 

[ON].

 

 

 

Tape is running, but

TV/VIDEO selector on the TV

Set the selector to VIDEO.

35

image will not appear

is not set to VIDEO.

 

 

 

on the TV screen.

Video heads are dirty.

Clean the video heads.

143

 

You attempted to play back

Stop playback/dubbing.

 

or dub copyright protected

 

 

 

 

tape.

 

 

 

No sound from the built-

Speaker volume is turned

Adjust the volume with the

34

in speaker.

off.

SET dial.

 

 

Memory Card Operation

Memory card cannot be

Memory card was not facing

Turn the memory card over

92

inserted.

the correct direction.

and reinsert it.

 

Memory card cannot be

Memory card is full.

Replace the memory card or

92

recorded.

 

erase images.

 

 

 

Memory card is not

Format the memory card.

117

 

 

formatted.

 

 

 

 

Memory card is not inserted.

Insert a memory card.

92

 

 

File number reached

Set [FILE NUMBERS] to

95

 

 

maximum value.

[RESET] and insert a new

 

 

 

 

memory card.

 

 

 

SD Memory Card is

Change the position of the

92

 

 

protected.

protect switch.

 

 

 

 

 

 

Memory card cannot be

Camcorder is not set to

Set the camcorder to CARD

108

played back.

CARD PLAY mode.

PLAY mode.

 

 

 

Memory card is not inserted.

Insert a memory card.

92

Image cannot be erased.

Image is protected.

Cancel the protection.

111

 

 

 

 

 

 

 

SD memory card is

Change the position of the

92

 

 

protected.

protect switch.

 

 

 

 

 

 

 

flashes red.

Card error occurred.

Turn off the camcorder.

117

 

 

 

 

 

Remove and reinsert the

 

 

 

 

memory card. Format the

 

 

 

 

memory card if flashing

 

 

 

 

persists.

 

 

 

 

 

 

Printing

 

The printer is not

The camcorder is set to

1. Set the camcorder to

 

operating even though

NETWORK mode.

CARD PLAY mode.

 

 

camcorder and printer

 

2. Disconnect and reconnect

 

 

are correctly connected.

 

the USB cable.

 

 

 

 

3. Turn off the printer and

 

150

 

 

turn it back on.

 

 

 

 

 

Page 150
Image 150
Canon ELURA65, ELURA60, ELURA70 instruction manual Playback, Memory Card Operation, Printing