Canon ELURA65, ELURA60, ELURA70 instruction manual Cancel Printing, Printing Errors

❍Refer to the instruction manual of each printer for information on which

interface cable to use with the camcorder.

The Canon CP-Printers CP-10 and CP-100 are supplied with two direct interface cables. Use the cable with the USB logo on the connector (DIF-100).

❍We recommend powering the camcorder from a household power source.

❍Refer also to the instruction manual of the respective printer.

❍The print setting menu may differ slightly depending on the connected printer.

Printing

CAMERA PLAY (VCR) CARD CAMERA

1.Select the still image you wish to print with the CARD +/– button.

2.Press the (print/share) button.

•Printing starts. The button flashes and glows steadily when printing is complete.

•If you wish to continue printing, select another still image with the CARD +/– button.

CARD PLAY

❍Observe the following precautions during printing, otherwise printing may not be performed correctly.

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not open the memory card cover or remove the memory card.

❍Images not recorded with this camcorder, uploaded from a computer, edited on a computer and images whose file names have been changed may not be printed correctly.

❍Cancel Printing

Press the SET dial during printing. A confirmation dialog appears. Select [OK] and press the SET dial.

-Canon Bubble Jet Printer: Printing stops even if it is incomplete and the paper is fed through.

-Canon CP-Printer: A print in progress cannot be stopped. Printing stops when the current print is finished and the remaining prints are canceled.

❍Printing Errors

If an error occurs during the printing process, an error message appears ( 140).

-Canon Bubble Jet Printer: Select [STOP] or [CONTINUE] and press the SET dial. With most errors, printing resumes automatically after you correct the error. Refer also to the printer manual for details.

120