Installing the Backup Battery
The backup battery allows the camcorder to retain date, time (
21) and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings.
E 
1.Press the OPEN button to open the LCD panel.
2.Pull out the battery holder.
3.Place the lithium battery with the + side facing downward into the battery holder.
4.Insert the battery holder.
5.Close the LCD panel.
w | e |
| r |
| q |
| Basic Functions Preparations |
|
| t | |
|
| - | |
|
|
|
WARNING!
•The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 212 °F (100 °C) or incinerate the battery.
•Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony, Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or explosion.
❍Do not pick up the battery using tweezers or other metal tools as this will cause a short circuit.
❍Wipe the battery with a clean dry cloth to ensure proper contact.
❍Keep the battery out of reach of children. If it is swallowed, seek medical assistance immediately. The battery case may break and the battery fluids may damage stomach and intestines.
❍Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.
The backup battery has a life span of about a year. j flashes in red to inform you that it needs to be replaced.
17
