Regency P40-NG1 Log Set Installation, 03-32, 03-47 03-37 03-46, 03-381, 03-34 03-40, 03-382

INSTALLATION

LOG SET INSTALLATION

INSTALLATION

Read the instructions below carefully and refer to the pictures. If the logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot operation.

Log kit (Part # 503-930) contains the following pieces:

a)	03-32	Back Log
b)	03-40	Ember Bed
c)	03-34	Front Left Log
d)	03-33	Middle Back Log
e)	03-36	Middle Right Cross Log
f)	03-37	Front Right Log
g)	03-38	Small Ember
h)	03-46	Log Center Left Y
i)	03-47	Log Center Y
j)	902-154	Embers Lava
k)	902-179	Vermiculite
l)	902-153	Rockwool

m)946-669 Platinum Embers (supplied with packaged manual)

03-47

03-37

03-46

03-33 03-38 (1)

03-34

03-40

3)Fit log 03-32 into the pins on the back air box. Push the log tight against the back brick panel.

4)Re-install the brackets removed in step 2 to hold the log in place.

03-32

5)Position log 03-40 up to and against the 2 tabs located on the front burner. Then slide log 03-40 to the right until it touches the burner tube.

03-32

03-38 (2)

Front Burner

03-36

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Remove the brackets on the left and right side of the back air box.

03-40

Burner Tube

Back Air

Box

32 Regency® P40-1 Direct Vent Gas Fireplace