Regency P40-LP1 Venting Arrangements, •Vent must be supported at offsets, Feet, Height, Vertical

INSTALLATION

VENTING ARRANGEMENTS

ALLOWABLE VERTICAL TERMINATIONS

The shaded area in the diagram shows all allowable combinations of straight vertical and offset to vertical terminations, using two 90o elbows, with Rigid Pipe Venting Systems for Propane and Natural Gas. Two 45o elbows equal to one 90o elbow. Maximum of four 45o elbows allowed.

0

40

38

2 4 6 8 10 12 14

INSTALLATION

•Vent must be supported at offsets.

•Firestops are required at each floor level and whenever passing through a wall.

•Maintain clearances to combustibles as listed in the "Clearances" section.

•Refer to "Vent Restrictor Position" section for details on how to change the vent restrictor to Set 1 or Set 2 if required.

Note: Must use optionalflue adapter when using Rigid Pipe (Part # 770-994).

	36
	34
	32
	30
	28
	26
	24
(Feet)	22
	20
Height
Vertical	18

16

14

12

10

8

6

4

2

0

Vent Restrictor on Set 2

Vent Restrictor on Set 1

Minimum 8’9” (2.6m)

Maximum: 40 ft. (12.2m)

Vent Restrictor

Factory Set

Maximum: 28 ft. (8.5m)

Minimum 12” (305mm)

Max. 10’ (3m)(centerline to centerline)

Regency® P40-1 Direct Vent Gas Fireplace 21