Cisco Systems MDS 9500 Series manual Power Specifications for the Cisco MDS 9513 Director

Appendix D Technical Specifications

Power Specifications for the Cisco MDS 9513 Director

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

Table D-6 Weight of Modules in the Cisco MDS 9000 Family (continued)

Module	Weight
Crossbar module fan tray	2.25 lb (1.13 kg)
Module blank panels	0.50 lb (0.25 kg)

Table D-7lists the specifications for the batteries on the Cisco MDS 9000 Family caching services module.

Note The CSM does not support Cisco SAN-OS Release 3.0(1).

Table D-7 Caching Services Module Battery Specifications

Attribute	Value
Nominal voltage	9.6 V
Rated capacity	Typical discharge capacity at 0.2C rate: 2100 mAh
	Minimum discharge capacity at 0.2C rate: 2000 mAh
	Minimum discharge capacity at 5C rate: 1800 mAh
	(1 V/cell discharge cut-off)
Discharge	The battery is capable of continuous discharge from
	41 to 140°F (5 to 60°C) at 5C-rate
Charge	From 32 to 59°F (0 to 15°C) at C/10 rate and from 59
	to 104°F (15 to 40°C) at C/2 rate
Storage temperature	32 to 95°F (0 to +35°C)
Relative humidity range	From 5 to 90%

Power Specifications for the Cisco MDS 9513 Director

This section includes the following topics:

•Specifications for the Cisco MDS 9513 Power Supplies, page D-6

•Component Power Requirements and Heat Dissipation for the Cisco MDS 9513 Director, page D-7

•AC Power Consumption for the Cisco MDS 9513 Director, page D-8

Specifications for the Cisco MDS 9513 Power Supplies

The 6000-W AC power supply provides power based upon the input voltage. Each power supply has two AC power connections and will provide power as follows:

•One AC power connection @110 VAC = No output

•Two AC power connection @110 VAC = 2900 W output

•One AC power connection @ 220 VAC = 2900 W output

•One AC power connection @110 VAC and one AC power connection @ 220 VAC = 2900 W output

Cisco MDS 9500 Series Hardware Installation Guide

D-6 OL-17467-02