Cisco Systems MDS 9500 Series Supervisor-2 Added Supervisor-2 module, X2 transceiver is a small

New and Changed Information

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

	Table 1	Documented Features for the Cisco MDS 9500 Series (continued)
				Changed in
	Feature		Description	Release	Where Documented
	Supervisor-2		Added Supervisor-2 module.	3.0(1)	The “Supervisor-2 Modules”
	module		Supervisor-2 modules can be used in		section on page 1-17.
			the Cisco MDS 9509 and 9506 Director
			in slots 5 and 6. Dual Supervisor-2
			modules must be used in slots 7 and 8
			of the Cisco MDS 9513 Director.
	48-port 4-Gbps		Added 48-port 4-Gbps Fibre Channel	3.0(1)	The “48-Port4-Gbps Fibre
	Fibre Channel		switching module. The switching		Channel Switching Module”
	switching		module offers 48 autosensing 1-, 2-,		section on page 1-34and the
	module		and 4-Gbps Fibre Channel ports and		“Technical Specifications”
			can be used in any of the Cisco MDS		section on page D-1.
			9500 Series chassis and in the Cisco
			MDS 9216i and 9216A Switches.
	24-port 4-Gbps		Added 24-port 4-Gbps Fibre Channel	3.0(1)	The “24-port4-Gbps Fibre
	Fibre Channel		switching module. The switching		Channel Switching Module”
	switching		module offers 24 autosensing 1-, 2-,		section on page 1-35and the
	module		and 4-Gbps Fibre Channel ports and		“Technical Specifications”
			can be used in any of the Cisco MDS		section on page D-1.
			9500 Series chassis and in the Cisco
			MDS 9216i and 9216A Switches.
	12-port 4-Gbps		Added 12-port 4-Gbps Fibre Channel	3.0(1)	The “12-port4-Gbps Fibre
	Fibre Channel		switching module. The switching		Channel Switching Module”
	switching		module can be used in any of the Cisco		section on page 1-35and the
	module		MDS 9500 Series chassis and in the		“Technical Specifications”
			Cisco MDS 9216i and 9216A Switches.		section on page D-1.
	4-port 10-Gbps		Added 4-port 10-Gbps Fibre Channel	3.0(1)	The “4-port10-Gbps Fibre
	Fibre Channel		switching module. The switching		Channel Switching Module”
	switching		module offers four dedicated		section on page 1-36and
	module		bandwidth Fibre Channel ports running		“Technical Specifications”
			at 10 Gbps with no oversubscription.		section on page D-1.
	Crossbar		Added crossbar modules. The Cisco	3.0(1)	The “Crossbar Modules”
	modules		MDS 9513 Director supports two		section on page 1-25and
			crossbar modules located at the rear of		“Removing and Installing a
			the chassis. Each Supervisor-2 module		Crossbar Module” section on
			has an associated crossbar module.		page 2-47.
	X2 transceiver		Added the X2 transceiver information.	3.0(1)	The “X2 Transceivers” section
			The X2 transceiver is a small		on page 1-55and the “X2
			form-factor pluggable optimized for		Transceiver Specifications”
			10-Gbps applications.		section on page 19.
	Fibre Channel		Added 4-Gbps Fibre Channel SFP trans-	3.0(1)	The “Fibre Channel SFP
	SFP transceiver		ceiver.		Transceivers” section on
					page 1-56and the “SFP and
					SFP+ Transceiver
					Specifications” section on
					page D-22.
			Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02						xi