Chapter 2 Installing the Cisco MDS 9500 Series
Installing the Chassis in a Cabinet or Rack
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .
Tip Keep the shipping container for use when moving or shipping the chassis in the future. The shipping carton can be flattened and stored with the pallet.
Note If you purchased this product through a Cisco reseller, contact the reseller directly for technical support. If you purchased this product directly from Cisco Systems, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
Note The switch is thoroughly inspected before shipment. If any damage occurred during transportation or any items are missing, contact your customer service representative immediately.
To inspect the shipment, follow these steps:
Step 1 Compare the shipment to the equipment list provided by your customer service representative and ensure that you have received all items, including the following:
•Print documentation and
•Grounding lug kit
•
•ESD wrist strap
•Cables and connectors
•Any optional items ordered
Step 2 Check for damage and report any discrepancies or damage to your customer service representative. Keep the following information ready:
•Invoice number of shipper (see packing slip)
•Model and serial number of the damaged unit
•Description of damage
•Effect of damage on the installation
Installing the Chassis in a Cabinet or Rack
This section describes how to install the Cisco MDS 9500 Series in a cabinet or rack that meets the requirements described in this document, using the
•Installing the Cisco MDS 9513 Director in a Rack, page
•Installing the Cisco MDS 9509 Director in a Rack, page
•Installing the Cisco MDS 9506 Director in a Rack, page
Caution If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
Cisco MDS 9500 Series Hardware Installation Guide
| ||
|
