Cisco Systems MDS 9500 Series manual CLI Configuration Guide

Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules

Migration Procedures for the MDS 9513 Director

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

	Step 2	Verify that the MDS 9513 Director is running Cisco SAN-OS 3.x by entering the show version command
		at the command line.
		This example shows the output of the show version command:
		switch# show version
		Cisco Storage Area Networking Operating System (SAN-OS) Software
		TAC support: http://www.cisco.com/tac
		Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved.
		The copyrights to certain works contained herein are owned by
		other third parties and are used and distributed under license.
		Some parts of this software may be covered under the GNU Public
		License or the GNU Lesser General Public License. A copy of
		each such license is available at
		http://www.gnu.org/licenses/gpl.html and
		http://www.gnu.org/licenses/lgpl.html
		Software
		BIOS: version 1.1.0
		loader: version 1.2(2)
		kickstart: version 3.0(3) [gdb]
		system: version 3.0(3) [gdb]
		BIOS compile time: 10/24/03
		kickstart image file is: bootflash:///boot-3.0.3
		kickstart compile time: 9/15/2006 10:00:00 [10/02/2006 06:26:25]
		system image file is: bootflash:///isan-3.0.3
		system compile time: 9/15/2006 10:00:00 [10/02/2006 06:45:25]
	Step 3	Upgrade to Cisco NX-OS 4.1(1b). Refer to the upgrade procedure described in the MDS 9000 Family
		CLI Configuration Guide.
	Step 4	Verify that the switch is running Cisco NX-OS 4.1(1b) by entering the show version command.
		This example shows the output of the show version command:
		switch# show version
		Cisco Nexus Operating System (NX-OS) Software
		TAC support: http://www.cisco.com/tac
		Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.
		The copyrights to certain works contained herein are owned by
		other third parties and are used and distributed under license.
		Some parts of this software are covered under the GNU Public
		License. A copy of the license is available at
		http://www.gnu.org/licenses/gpl.html.
		Software
		BIOS:	version 1.0.7
		loader:	version N/A
		kickstart:	version 4.1(1b)
		system:	version 4.1(1b)
		BIOS compile time:		08/26/08
		kickstart image file is:		bootflash:/bootimage
		kickstart compile time:		10/12/2020 25:00:00 [09/06/2008 01:36:07]
		system image file is:		bootflash:/isanimage
		system compile time:		8/22/2008 0:00:00 [09/06/2008 02:48:50]
		Hardware
		cisco MDS 9513 (13 Slot) Chassis ("Supervisor/Fabric-2")
		Motorola, 7447A, altivec		with 1032472 kB of memory.
		Processor Board ID JAE1217FOFI
		Device name: sw5-qa01
		bootflash:	1023120 kB
		slot0:	511664 kB (expansion flash)
		Kernel uptime is 1 day(s), 9 hour(s), 12 minute(s), 4 second(s)
		Last reset at 518531 usecs after Sun Sep 7 01:29:37 2008
		Reason: Reset triggered due to Switchover Request by User
	Cisco MDS 9500 Series Hardware Installation Guide
A-4				OL-17467-02