Cisco Systems MDS 9500 Series manual LEDs on the 18/4-Port Multiservice Module

Chapter 1 Product Overview

Services Modules

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

LEDs on the 18/4-Port Multiservice Module

Table 1-15describes the LEDs for the 18/4-port Multiservice module.

Table 1-15		LEDs for the Cisco MDS 9000 Family 18/4-Port Multiservice Modules
LED	Status		Description
Status	Green		All diagnostics pass. The module is operational (normal
			initialization sequence).
	Orange		One of the following occurs or occurred:
			• The module is booting or running diagnostics (normal
			initialization sequence).
			• The inlet air temperature of the system exceeded the
			maximum system operating temperature limit (a minor
			environmental warning). To ensure maximum product
			life, you should immediately correct the environmental
			temperature and restore the system to normal operation.
	Red		One of the following occurred:
			• The diagnostic test failed. The module is not operational
			because a fault occurred during the initialization
			sequence.
			• The inlet air temperature of the system exceeded the safe
			operating temperature limits of the card (a major
			environmental warning). The card shut down to prevent
			permanent damage.
Link	Solid		Link is up.
	green
	Solid		Link is disabled by software.
	yellow
	Flashing		A fault condition exists.
	yellow
	Off		No link.

	Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02		1-43