Cisco Systems MDS 9500 Series manual 120093

Chapter 2 Installing the Cisco MDS 9500 Series

Removing and Installing Clock Modules

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

These tools are required to remove and install a clock module:

•Number 1 Phillips screwdriver

•Your own ESD-prevention equipment or the disposable grounding wrist strap included with the clock module replacement kit

The clock module is located behind the top power supply in the rear of the Cisco MDS 9506 Director. Figure 2-45shows the rear view of the Cisco MDS 9506 Director with both power supplies removed.

Figure 2-45 Clock Module Location on the Cisco MDS 9506 Director (Rear View)

1

Cisco MDS 9506

120093

1

Clock module

Caution Always wear an ESD wrist strap when handling modules or coming into contact with internal components.

	Cisco MDS 9500 Series Hardware Installation Guide
2-84	OL-17467-02