Manuals / Cisco Systems / Computer Equipment / Network Card

Cisco Systems MDS 9500 Series manual Module Specifications, Physical Characteristics

Models: MDS 9500 Series

1 288

Download 288 pages 59.22 Kb

Page 216

Appendix D Technical Specifications

Module Specifications

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

Table D-4	Physical Specifications for the Cisco MDS 9506 Director (continued)

Description	Specification

Power supply	1900-W, AC input
	1900-W, DC input

Airflow	300 lfm2 through system fan module, or 80 cfm3 per supervisor,
	switching, or services module (total of 480 cfm if all slots are
	filled).
	Spacing requirements:

•If installed in a cabinet, a minimum of 2.5 in. (6.4 cm) is required between the chassis air vents and the cabinet walls.

•If installed in an open rack (no side panels), the horizontal distance required between the chassis and any devices that exhaust air towards the chassis is a minimum of 6 in.

(15.2 cm), and the distance required between the chassis air vents and any walls is a minimum of 2.5 in. (6.4 cm).

1.RU = rack unit; 1 RU = 1.75 in. (4.45 cm)

2.lfm = linear feet per minute

3.cfm = cubic feet per minute

Module Specifications

Table D-5lists the specifications for the Cisco MDS 9500 Series supervisor modules, services modules, and switching modules.

Table D-5 Cisco MDS 9500 Series Module Specifications

Description

Specification

Environmental Requirements

Temperature, certified for operation	32 to 104°F (0 to 40°C)

Temperature, designed and tested	32 to 130°F (0 to 55°C)
for operation

Temperature, ambient nonoperating	-40 to 167°F (-40 to 75°C)
and storage

Humidity (RH), ambient	10 to 90%
(noncondensing) operating

Altitude, certified for operation	0 to 6500 ft (0 to 2000 m)

Altitude, designed and tested for	-200 to 10000 ft (-60 to 3000 m)
operation

Physical Characteristics

Cisco MDS 9500 Series Hardware Installation Guide

	D-4	OL-17467-02

Image 216

Cisco Systems MDS 9500 Series manual Module Specifications, Physical Characteristics

Contents

Cisco MDS 9500 Series Hardware Installation Guide Americas HeadquartersPage N T E N T S Port Index Availability Removing and Installing a Crossbar Module Installing an AC Power Supply in the Cisco MDS 9513 Director Cabinet and Rack Installation C-1 Chassis Console Port E-2 COM1 Port E-3 Feature Description Release Where Documented SFP+ FipsSwitching Module offers 48 autosensing 1 Switching Module offers 24 autosensing 1Switching Module can be used in any of the Cisco Cisco MDS 9216i and 9216A Switches3000W Power Added 3000W power supply for Channel Services Module SSMInstallation Modules Specific Port IP Provided Fcip services and iSCSI 34aSFP Cwdm SFPXiv Audience OrganizationChapter Title Description Provides a site-planning checklist and sample maintenance ConventionsAppendix E Appendix FXvii Regulatory Compliance and Safety Information Hardware InstallationRelated Documentation Release NotesCommand-Line Interface Troubleshooting and ReferenceInstallation and Configuration Note Cisco Fabric ManagerPreface Product Overview Chassis Cisco MDS 9513 Director Cisco MDS 9513 Chassis Front Panel View Rear Panel 9513 Chassis Cisco MDS 9509 Director Cisco MDS 9506 Director Cisco MDS 9506 ChassisBackplane and Clock Modules Lower LEDs Upper LEDsStatus Description Cisco MDS Fibre Channel Switch for IBM Blade Center Power SuppliesCisco MDS 9513 Power Supplies Power supply switch Power Supply LEDs AC power connectionFAN OK Output FailCisco MDS 9509 Power Supplies 4000-W AC Power Supply for the Cisco MDS 9509 Director3000-W AC Power Supply for the Cisco MDS 9509 Director 2500-W AC Power Supply for the Cisco MDS 9509 Director Cisco MDS 9506 Power Supplies 11 Cisco MDS 9506 Power Supply 1900-W AC or DCFan Modules Supervisor ModulesSupervisor-2 Modules 12 Cisco MDS 9500 Series Supervisor-2 ModuleControl and Management ProcessorPort Interfaces Memory BytesLEDs on the Supervisor-2 Module 13 Supervisor-2 Module LEDsMgmt Green Link is up 10/100/1000 Off No link Ethernet LinkLED Supervisor-1 Modules 14shows a Cisco MDS 9500 Series Supervisor-1 moduleCrossbar Switching Fabric LEDs on the Supervisor-1 Module 15 Supervisor-1 Module LEDsLEDs for the Cisco MDS 9500 Series Supervisor Modules Crossbar Modules 16 Crossbar Module LEDsLEDs for the Cisco MDS 9500 Crossbar Modules Cisco MDS 9000 Series Module Compatibility Module 9513 9509 9506 9222i 9216A 9216iPort Index Availability Module Physical Ports Port Indexes AllocatedSSM Example 1-1 Borrowing Port Indexes from Another Slot Port 4-Gbps Fibre Channel switching module Supervisor-1 Supervisor Module Port Index RequirementsPort 4-Gbps Fibre Channel switching module Supervisor-2 Physical Port Slot No Modules in Cisco MDS 9509 DirectorPorts Indexes Physical Port Slot No Modules in Cisco MDS 9513 DirectorSwitching Modules Generation 2 modulesGeneration 1 modules Port 8-Gbps Fibre Channel Switching Module Port 8-Gbps Host-Optimized Fibre Channel Switching ModulePort 4-Gbps Fibre Channel Switching Module Link LEDsStatus LED Fibre Channel ports Link LEDs Port group Status LED Link LEDs Fibre Channel portsPort 10-Gbps Fibre Channel Switching Module Status LED Link LED X2 port interfacesLEDs on the Generation 2 Switching Modules Port 2-Gbps Fibre Channel Switching Module25 Cisco MDS 9000 Family 32-Port 2-Gbps Switching Module Switching Module Features LEDs on the Generation 1 Switching Module Services Modules 18/4-Port Multiservice Module27shows the MSM-18/4 module LEDs on the 18/4-Port Multiservice Module 15describes the LEDs for the 18/4-port Multiservice module14/2-Port Multiprotocol Services Module LEDs on the MPS-14/2 Module 16describes the LEDs for the MPS-14/2 modulesIP Storage Services Modules Status LED Link LEDs Gigabit Ethernet ports Asset tagLEDs on IP Storage Services Modules 17describes the LEDs for the IPS services modulesPort Fibre Channel Advanced Services Module 31shows the Fibre Channel ASMLEDs on the Fibre Channel Advanced Services Modules 18describes the LEDs for the ASMPort Fibre Channel Storage Services Module 32shows the SSMLEDs on the Storage Services Modules 19describes the LEDs for the Storage Services ModulesCaching Services Module 33shows the CSMBattery Disk driveLEDs on the Caching Services Module 20describes the LEDs for the CSMSupported Transceivers X2 TransceiversFibre Channel SFP Transceivers Combination Fibre Channel/Gigabit Ethernet SFP TransceiversGigabit Ethernet SFP Transceivers Dwdm Fibre Channel SFP Transceivers Product Overview Supported Transceivers Installing the Cisco MDS 9500 Series Preinstallation Installation OptionsThis section provides the following topics Installation Guidelines Installing the Cisco MDS 9500 Series Preinstallation Unpacking and Inspecting the Switch Required EquipmentInstalling the Chassis in a Cabinet or Rack Installing the Cisco MDS 9513 Director in a Rack Quantity Part DescriptionPositioning the Rack-Mount Support Brackets Positioning the Support Bars Securing the Rack-Mount Support Brackets Installing the Cisco MDS 9509 Director in a Rack Screws, 12-24 or Mounting rail Support bracket Cable guide12-24 x 3/4-inch Phillips binder-head screws 10-32 x 3/4-inch Phillips binder-head screwsM3 x 8-mm Phillips pan-head screws Side rack-mount bracketsFront of rack Installing the Cisco MDS 9509 Chassis in the Rack Crossbar Mounting railInstalling the Cisco MDS 9506 Director in a Rack 12-24 x 3/4-in. Phillips binder-head screws 10-32 x 3/4-in. Phillips binder-head screwsM4 x 6-mm Phillips pan-head screws System Grounding Proper Grounding PracticesEnvironment Level Grounding Recommendations Preventing Electrostatic Discharge Damage Cisco MDS 9500 Series Hardware Installation Guide 133947 Establishing the System Ground Required Tools and EquipmentGrounding the Chassis 144510 ESD plug ESD socket 12 ESD Ground Location on the Cisco MDS 9513 Chassis Rear13 System Ground Location on the Cisco MDS 9509 Chassis 14 System Ground Location on the Cisco MDS 9506 Chassis Starting Up the Switch Connecting the Power SuppliesThis section provides the following information 15 Cable Retention on the Power Supply 16 2500-W AC Power Supply for the Cisco MDS 9509 Director Captive screws AC power connection PEM switch 18shows an AC PEM for a Cisco MDS 9506 Director19 Power Supply for Cisco MDS 9506 Director 20shows the 2500-W DC power supply Statement 21 DC PEM for a Cisco MDS 9506 Director Powering Up the Switch and Verifying Component Installation Installing the Cisco MDS 9500 Series Starting Up the Switch This section provides the following information Removing Supervisor Modules Installing Supervisor Modules Slot guides EMI Gasket 22 Positioning a Module in the Chassis23 Clearing the EMI Gasket 24 Closing the Ejector Levers Removing a Caching Services Module Removing Other Switching and Services Modules Cisco MDS 9500 Series Hardware Installation Guide Removing and Installing a Crossbar Module 25 Captive Screws and Ejector Levers on the Crossbar Module 26 Installing the Crossbar Module Maintaining a Caching Services Module Maintaining the Batteries on the Caching Services ModuleTighten the two captive screws on the module to 8 in-lb Removing and Installing a Power Supply or PEM Maintaining the Disk Drives on the Caching Services ModuleRemoving an AC Power Supply from the Cisco MDS 9513 Director 28 Handling a Power Supply for the Cisco MDS 9513 Director Installing an AC Power Supply in the Cisco MDS 9513 Director 29 AC Power Supply for the Cisco MDS 9513 Director Removing an AC Power Supply from the Cisco MDS 9509 Director Installing an AC Power Supply in the Cisco MDS 9509 Director 31 4000-W AC Power Supply for the Cisco MDS 9509 Director 32 3000-W AC Power Supply for the Cisco MDS 9509 Director 33 2500-W AC Power Supply for the Cisco MDS 9509 Director Removing a DC Power Supply from the Cisco MDS 9509 Director DC power supply for the Cisco MDS 9509 Director is 2500 WInstalling a DC Power Supply in the Cisco MDS 9509 Director OL-17467-02 Removing an AC PEM Removing a DC PEM35 Connecting or Disconnecting the DC PEM Installing an AC PEM Installing a DC PEM36 Handling a Power Supply for the Cisco MDS 9506 Director Removing and Installing Fan Modules Removing a Front Fan Module on the Cisco MDS 9513 Director This section includes the following topicsInstalling a Front Fan Module on the Cisco MDS 9513 Director Removing the Crossbar Module Fan Tray Installing the Crossbar Module Fan Tray 38 Removing a Crossbar Module Fan TrayInstalling a Front Fan Module on the Cisco MDS 9509 Director Removing a Front Fan Module on the Cisco MDS 9509 DirectorInstalling a Front Fan Module on the Cisco MDS 9506 Director Removing a Front Fan Module on the Cisco MDS 9506 DirectorRemoving and Installing CompactFlash Cards Removing a CompactFlash CardRemoving and Installing Clock Modules Installing a CompactFlash CardCisco MDS 9513 clock module Disposable ESD wrist strapRemoving a Clock Module from the Cisco MDS 9513 Director Repeat and to remove any additional clock modules Installing a Clock Module into the Cisco MDS 9513 Director 42 Clock Module for the Cisco MDS 9513 DirectorRemoving a Clock Module from the Cisco MDS 9509 Director Cisco MDS 9509 clock moduleM3 x 6-mm Phillips pan-head screws OL-17467-02 Connectors Clock module Installing a Clock Module into the Cisco MDS 9509 Director Removing a Clock Module from the Cisco MDS 9506 DirectorCisco MDS 9506 clock module 120093 Connector Installing a Clock Module into the Cisco MDS 9506 Director Overview Usage Guidelines Generation 3 Module Fabric Module Software ReleaseMigration Procedures for the MDS 9513 Director Before You Begin Upgrading the MDS 9513 DirectorCLI Configuration Guide Switch# out-of-service xbar Damage section on 188730 Figure A-2 Installing a Fabric Module SlotSwitch# show module xbar Figure A-3 Strategy 2 Migration Process Flow Switch# show hardware fabric-mode Mod World-Wide-Names WWN 10.182 304 OL-17467-02 Cisco MDS 9500 Series Hardware Installation Guide Connecting the Cisco MDS 9500 Series Connecting to the Console Port Preparing for Network Connections91701 Connecting to the COM1 Port 99272 Connecting to the Mgmt 10/100/1000 Ethernet Port Connecting to the Mgmt 10/100 Ethernet Port 99328 Connecting to a Fibre Channel Port Removing and Installing X2 TransceiversFigure B-5 Cisco MDS 9000 Family X2 Transceivers Installing an X2 Transceiver Removing an X2 TransceiverRemoving and Installing SFP Transceivers Removing an SFP Transceiver115237 Removing and Installing Cables into SFP Transceivers Installing an SFP TransceiverRemoving a Cable from an SFP Transceiver Installing a Cable into an SFP Transceiver Maintaining SFP Transceivers and Fiber-Optic Cables Cabinet and Rack Requirements General Requirements for Cabinets and RacksCabinet and Rack Requirements for the Cisco MDS 9513 Chassis Requirements Specific to Perforated Cabinets Panduit CorporationRequirements Specific to Solid-Walled Cabinets Rittal CorporationRequirements Specific to Standard Open Racks Cisco MDS 9000 Family Telco and EIA Shelf Bracket Requirements Specific to Two-Post Telco RacksBefore Installing the Rack-Mount Support Brackets Rack-Mounting GuidelinesMDS Rack Type MDS 9216A EIA 4-PostBefore Installing the Shelf Brackets Required EquipmentInstalling the Shelf Bracket Kit into a Two-Post Telco Rack Installing the Shelf Bracket Kit into a Four-Post EIA Rack Figure C-2 Installing the Shelf Bracket Kit into an EIA RackInstalling the Switch on the Rack-Mount Support Brackets Installing the Switch on the Shelf Brackets Removing the Shelf Bracket Kit OptionalCisco MDS 9500 Shelf Bracket 20 x 3/4 in. Phillips pan-head screws with lock washers 10-32 x 1/3 in. Phillips pan-head screws with lock washersClip nuts Figure C-3 Installing the Shelf Bracket Kit into a Rack Installing the Switch on the Shelf Brackets Switch Specifications Description SpecificationAppendix D Technical Specifications Switch Specifications Table D-3 Module Specifications Physical CharacteristicsWeight of Modules Module WeightPower Specifications for the Cisco MDS 9513 Director Specifications for the Cisco MDS 9513 Power SuppliesAttribute Value Table D-8 Specifications for Cisco MDS 9513 Power Supplies AC Power Consumption for the Cisco MDS 9513 Director Power Heat Input Current Module TypeRequired Dissipation 90 VAC 120 VAC 180 VAC 240 VAC Release Watts BTU/hr AmpsPower Specifications for the Cisco MDS 9509 Director Specifications for the Cisco MDS 9509 Power SuppliesModule Type / Product Number DC Power Supply NX-OS SAN-OS DS-X9308-SMIP 220 940 Port IPS module 160 683DS-X9304-SMIP Power Heat Module Type Required Dissipation 48 VDC 60 VDCSAN-OS Release Watts BTU/hr Amps 220 1000 Port IPS module 160 728Power Specifications for the Cisco MDS 9506 Director AC Power Consumption for the Cisco MDS 9509 DirectorSpecifications for the Cisco MDS 9506 Power Supplies VDCNX-OS SAN-OS VDC amps Cisco MDS 126 573 Chassis with fan module DS-C9506200 910 DS-X9560-SMC 210 955 X2 Transceiver Specifications AC Power Consumption for the Cisco MDS 9506 DirectorPower dBm Cisco 10-Gbps Fibre Channel X2 TransceiversTransceiver Module Product Number Description Type Average Transmit Average ReceiveCisco 10-Gbps Ethernet X2 Transceivers Operating StorageSFP and SFP+ Transceiver Specifications Cisco 10-Gbps Ethernet Dwdm X2 TransceiverCisco Fibre Channel SFP and SFP+ Transceivers Average Transmit Average Receive Power dBm Wavelength Core Size Baud Rate Cable DistanceFiber Type Micon GBd Meter 125 Miles 10 km 250 500Safety Information for the Cisco MDS 9000 Family DBm Power dBm DBm Nanometer Fiber Type Micon GBd Meter0625 Miles 10 km 125 10.0 Micron 62 50 micron OM2Parameter Symbol Min Max Unit Storage temperature Case temperature Relative humidityCisco Fibre Channel and Gigabit Ethernet Transceivers DS-SFP-FCGE-LWPower dBm Fiber Loss Budget dBm 10.0 FC 17 GE FC 62.5 micron FC 50.0 micron GE 62.5 micron11.0 19 GE Cisco Cwdm SFP Transceivers Description ColorAll Cisco 2-Gbps 40C 85C Parameters Symbol Minimum Typical Maximum Units SmsrSuppression Ratio Transmitter Optical 1450 1620 Input Wavelength TransmitterAll Cisco 4-Gbps 40C 85C Cisco Gigabit Ethernet Transceivers Cisco Dwdm SFP TransceiversTransceiver Module Product Number Description DS-SFP-GE-TOL-17467-02 Cisco MDS 9500 Series Hardware Installation Guide Cable and Port Specifications Cables and Adapters ProvidedPin Signal Console PortConsole Port Pinouts ConsoleCOM1 Port COM1 Port PinoutsDCD Connecting the COM1 Port to a Modem Mgmt 10/100/1000 Ethernet PortDB-9F/RJ45F RJ-45 CTS DSR DCDTD+ RD+Not used Figure E-3 RJ-45 Interface Cable Connector Mgmt 10/100 Ethernet PortSupported Power Cords and Plugs Power CordsMDS 9509 2500W Power Supply Length Description Feet MetersUSA MDS94973 United Kingdom BS89/13, BS 1363/A 13 a replaceable fuse Jumper Power Cord Supported Plugs for the 4000-W AC Power SupplyPower Supply AC Power Cords Power CordAC Power Cord Illustrations CAB-9K20A-NACAB-9K16A-AUS CAB-9K16A-EU OL-17467-02 Site Planning and Maintenance Records Contacting Customer ServiceFinding the Chassis Serial Number Figure F-1 Serial Number Location on Cisco MDS 9513 DirectorFigure F-2 Serial Number Location on Cisco MDS 9509 Director Site Preparation Checklist Task No Planning Activity Verified By Time DateTask No Planning Activity Verified By Time Date Contact and Site Information Chassis and Module Information Slot Module Type Module Serial Number SupervisorSlot Module Type Module Serial Number Supervisor Port 8-Gbps Fibre Channel switching modules description BladeswitchProviding MDS 9509 Director Installing in a rack procedure Power supplies Removing from MDS 9506 Director procedureMesh design Supervisor-2 modules Figure B-15 LEDs ASM table Clock modules Supervisor-2 modules tableInstalling in a rack procedure Power supply LEDs table Removing clock modules procedureCSM Power supplies MDS 9509 Director LEDs LEDs table MDS 9506 Director LEDs tableMDS 9509 Director LEDs table Description Generation 1 modules Installing ASM CSMCwdm DwdmIN-8 IN-9 CSM IN-11 Nebs IN-13 SSM IN-15 IN-16