Cisco Systems MDS 9500 Series manual Nx-Os San-Os

Appendix D Technical Specifications

Power Specifications for the Cisco MDS 9506 Director

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

Component Power Requirements and Heat Dissipation for the Cisco MDS 9506 Director

When sizing the air-conditioning requirements for an installation, consider heat dissipation. The power and heat associated with a Cisco MDS 9506 Director varies depending upon the following:

•Power supply type

•Switching module type and number of switching modules installed

•Average switching traffic levels

Table D-16and Table D-17list the AC and DC power requirements and heat dissipation for the components of the Cisco MDS 9506 Director.

Note Unless noted otherwise, the information listed in Table D-16and Table D-17is based on worst-case conditions. Typical numbers are approximately 30 percent below the numbers listed here.

Table D-16			Power Requirements and Heat Dissipation for the 1900-W AC Power Supply
						Power	Heat	Input Current
	Module Type/			NX-OS	SAN-OS	Required	Dissipation	90 VAC	120 VAC	180 VAC		240 VAC
	Product Number			Release	Release	(watts)	(BTU/hr)	(amps)	(amps)	(amps)		(amps)
	Cisco MDS 9506 chassis with fan				3.x	126	538	1.75	1.31	0.88		0.66
	module
					2.x and	126	538	1.75	1.32	0.88		0.66
	DS-C9506
					1.x
	Supervisor/fabric 1				3.x	210	897	2.92	2.19	1.46		1.09
	DS-X9530-SF1
					2.x and	220	940	3.05	2.29	1.53		1.15
					1.x
	Supervisor-2, DS-X9530-SF2-K9				3.x	126	538	1.75	1.31	0.88		0.66
	48-port 4-Gbps switching module,				3.x	185	790	2.57	1.93	1.28		0.96
	DS-X9148
					2.x and	—	—	—	—	—		—
					1.x
	24-port 4-Gbps switching module,				3.x	147	628	2.04	1.53	1.02		0.77
	DS-X9124
					2.x and	—	—	—	—	—		—
					1.x
	12-port 4-Gbps switching module,				3.x	132	564	1.83	1.38	0.92		0.69
	DS-X9112
					2.x and	—	—	—	—	—		—
					1.x
	4-Port 10-Gbps switching module,				3.x	172	734	2.39	1.79	1.19		0.90
	DS-X9704
					2.x and	—	—	—	—	—		—
					1.x
	32-port 1-Gbps/2-Gbps Fibre				3.x	191	816	2.65	1.99	1.33		0.99
	Channel module
					2.x and	200	855	2.78	2.08	1.39		1.04
	DS-X9032
					1.x
		Cisco MDS 9500 Series Hardware Installation Guide
	D-16										OL-17467-02