Torque Specifications
Critical Application | Models | Thread | Torque | |
Locker | Range | |||
|
| |||
Wheel motor bolts (Securing | Big/Small Stander, Stander X, Sport X, | Loctite | ||
motor to support) | RH, WSES, Velke | 2760 | ||
| ||||
Wheel motor bolts / nuts | ZK, MMZ, Sentar3 | N/A | ||
(Securing motor to support) | ||||
|
|
| ||
Clutch to engine shaft | All Models | Loctite | ||
| Big Stander, Stander X, Sport X (15P) |
| ||
Wheel hub to wheel motor | ZK, MMZ, Sentar3 (15E) | N/A | ||
| All Others (12P) |
| ||
Wheel lug nuts | All Models | N/A | ||
Split Hub (Spindle & Drive) (Gr 8) | All Models | N/A | ||
Blade Bolts | All Models | N/A |
Spindle and Drive Pulley Split hub R&R
•Remove 2, ¼” bolts from split hub and install in t hreaded holes in hub.
•Slowly tighten each bolt, alternating as you tighten bolts against the pulley.
•The hub will separate from the pulley.
•Replace grade 8 bolts and install in reverse order using the assembly holes to tighten hub onto pulley and spindle shaft.
Assembly | Threaded |
| Tightening will | |
Assembly | separate the hub | |||
Removal | ||||
hole | from the pulley | |||
hole | ||||
holes | ||||
|
| |||
|
|
|
Spindle Set Up / Blade Options | Spindle Nut |
Parts: | PN - 12990003 |
|
Spindle Blade Spacer
PN – 13990007 / 1 or 3 ea
Spindle Blade Spacer
PN – 13990007 / 3 or 5 ea
Stock Fusion Blade PN – 71440008 – 16.5”
71440009 – 18”
71440010 – 21”
Spindle Washer
Spindle – Thru BoltPN - 13990039
PN - 71460126
17