Cisco Systems MDS 9500 Series manual DC Power Supply

Appendix D Technical Specifications

Power Specifications for the Cisco MDS 9509 Director

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

		Table D-11	Specifications for Cisco MDS 9509 Power Supplies (continued)
		Description		Specification
		Current rating		16 A maximum at 100 to 120 VAC and 1300-W output.
				16 A maximum at 200 to 240 VAC and 2500-W output.
				Note For current ratings of plugs, see Figure E-5 on page E-9.
		Frequency		50 to 60 Hz (nominal) (±3 Hz for full range).
		Output capacity		1325 W maximum (100 to 120 VAC).
				2525 W maximum (200 to 240 VAC).
		Output voltage at 110/120		3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 27.5 A.
		Output voltage at 200/240		3.3 V at 1 5 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A.
		2500-W DC Power Supply
		Voltage		-48 VDC to -60 VDC continuous.
		Current rating		70 A at -48 VDC; 55 A at -60 VDC; 80 A at -40.5 VDC.
		Terminal block		Accommodates 2 to 14 AWG copper conductors. Use 90°C
				copper conductors for North American installations.
				Note Actual size of the wire required is determined by the
				installer or local electrician. Terminal block material is
				rated at 302°F (150°C).
		Output capacity		2525 W maximum (-48 to -60 VDC).
		Output voltage		3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A.
		3000-W AC Power Supply
		Type		Autoranging input with power factor corrector.
		Voltage		100 to 240 VAC (±10%).
		Current rating		17.6 A maximum at 100 to 120 VAC and 1400-W output.
				17.6 A maximum at 200 to 240 VAC and 3000-W output.
				For current ratings of plugs, see Figure E-5 on page E-9
		Frequency		50 to 60 Hz (nominal) (±3 Hz for full range).
		Output capacity		1400 W maximum (100 to 120 VAC).
				3000 W maximum (200 to 240 VAC).
		Output voltage at 110/120		3.3 V at 15 A; 12 V at 12 A; 42 V at 27.9 A.
		Output voltage at 200/240		3.3 V at 1 5 A; 12 V at 12 A; 42 V at 66 A.
		4000-W AC Power Supply
		Type		High-line input with power factor corrector, 220 VAC,
				single-phase circuit.
		Voltage		200 to 240 VAC (±10%).
		Current rating		23 A
				Note For current ratings of plugs, see Figure E-8 on page E-11.
		Frequency		50/60 Hz (nominal) (±3% for full range).
		Output capacity		4000 W maximum.
		Output voltage at 200/240		3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 91.2 A
	Cisco MDS 9500 Series Hardware Installation Guide
D-10				OL-17467-02