Cisco Systems MDS 9500 Series Requirements Specific to Solid-Walled Cabinets, Rittal Corporation

Appendix C Cabinet and Rack Installation

Cabinet and Rack Requirements

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m .

A perforated cabinet that conforms to these requirements is available from Rittal Corporation:

Rittal Corporation

One Rittal Place

Springfield, OH 45504

Contact: (800) 477–4220

Cabinet P/N: Rittal 9969427

Cabinet description: PS-DK/OEM Cabinet Assembly, 78.7 in. (1998 mm) x 23.6 in. (600 mm) x 39.4 in. (1000 mm) (H x W x D) (42RU)

A new cabinet that conforms to these requirements is available from Panduit Corporation:

Panduit Corporation

17301 South Ridgeland Avenue

Tinley Park, IL 60477

Customer Service and Technical Support phone number: 800 777-3300.

Cabinet P/N: CN4-1

Cabinet description: Net-Access cabinet, 31.5 in. W X 40 in. D X 84 in. H (800 mm x 1017 mm x 2134 mm), 45 RU cable management on front and rear of front posts

For more information see http://www.panduit.com.

A new cabinet that conforms to these requirements is available from Chatsworth Products:

Chatsworth Products, Inc.

31425 Agoura Road

Westlake Village, CA 91361

Customer Service and Technical Support phone number 800 834-4969

Cabinet: P/N: NF2K-113C-C42

Cabinet description: The N-Series TeraFrame Network Cabinet, 31.4 in. W X 40.4 in. D X 83.4 in. H (798 mm x 1025 mm x 2118 mm), 45 RU

For more information see: http://www.chatsworth.com/ciscoteraframe

Note Do not use the perforated cabinet from Rittal Corporation with the Cisco MDS 9513 Director.

Requirements Specific to Solid-Walled Cabinets

A solid-walled cabinet is defined here as a cabinet with solid (nonperforated) front and rear doors and solid side walls. In addition to the requirements listed in the “General Requirements for Cabinets and Racks” section on page C-1, solid-walled cabinets must meet the following requirements:

Solid-Walled Cabinet Requirements for the Cisco MDS 9513 Chassis

The solid-walled cabinet requirements for the Cisco MDS 9513 chassis are as follows:

•Perforated front and back doors and solid or open side panels.

Cisco MDS 9500 Series Hardware Installation Guide

C-4 OL-17467-02