Fujitsu DL6400 manual Demonstration Pattern Printing

DL6400/6600 Book Page 11 Friday, July 31, 1998 11:42 AM

Demonstration Pattern Printing

Demonstration Pattern Printing

The printer prints a demonstration pattern showing some printing features, as shown in Figure 5-4. To print a demonstration pattern, follow the steps below.

For the operation of the printer with the LCD control panel, see Appendix E.

1.Load a sheet of letter- or A4-size paper.

2.Turn off the printer.

3.Holding down the FONT button, turn the printer back on. The printer will start printing the demonstration pattern.

4.For cut sheets, the demonstration stops after printing a page. If a cut-sheet feeder or continuous forms are used, the demonstration pattern is repeated. To stop or restart the demonstration during printing, press ONLINE.

5.To exit demonstration mode, turn off the printer.

OPERATING THE PRINTER

User’s Manual 5-11