Fujitsu DL6400 manual Changing Head Gap Adjustment Options, Amount, Ply

DL6400/6600 Book Page 36 Friday, July 31, 1998 11:42 AM

Changing Head Gap Adjustment Options

Changing Head

Gap Adjustment

Options

The GAP-ADJ function adjusts the gap between the print head and the paper. This function is displayed only when the automatic paper thickness control (APTC) feature is built in.

Table 8–7 GAP-ADJ option

GAP-ADJ item	Options	Description
<AMOUNT>		Specifies the print head gap.
	AUTO	The print head gap is set automatically.
	1-PLY	Select one to eight-ply paper and auxiliary positions
	2-PLY	A, B, C, or D.
	3-PLY
	4-PLY
	5-PLY
	6-PLY
	7-PLY
	8-PLY
	POS.A
	POS.B
	POS.C
	POS.D
	MANUAL	Adjust the head gap using the paper thickness lever.
<==END==>		Indicates item termination.

Exiting and Saving

Exit setup mode and save any changes either by exiting setup mode immediately and selecting SAVE&END or by printing before exiting setup mode, selecting SELF-TST, and pressing ONLINE.

Either way, changed settings are saved as the printer's new default settings. These new default settings remain active until they are changed.

8-36 User’s Manual