Fujitsu DL6400 manual Selecting options in MENU1 and MENU2, Saving changed options

#E_AppendixE Page 17 Wednesday, September 2, 1998 10:05 AM

Using the Setup Menus

Selecting options in MENU1 and MENU2

“Setup Mode Reference” on page 8-44 describes the assignment of functions, items, and options in setup menus. The following example shows how to select (not change) the print quality from letter to draft to speed printing using MENU1. It also shows how to scroll forward and backward through the setup menus.

Func. ↓	Item ↓	Option ↓
MENU1	EMULATE	DPL24C+*
Func. ↓	Item ↓	Option ↓
MENU1	QUALITY	LETTER*
Func. ↓	Item ↓	Option ↓
MENU1	QUALITY	DRAFT

1.Enter setup mode. If MENU1 is not displayed un- der Func., press F1 until it appears.

2.Press F2 until QUALITY appears under Item. An asterisk (*) appears next to each default option.

3.Press F3 until DRAFT appears under Option.

Draft print quality is now selected. To use this option in printing, save it. If you are working through the example setup operations described here, go to the SAVE function on page E-18.

Scrolling the menu

•To scroll forward quickly through the setup functions, items, or options, press and hold down F1, F2, or F3. The last selection wraps around to the first selection.

•To scroll backward when you pass the desired function, item, or option, press the ↓↑ button to make the arrows on the display point up (↑). To scroll quickly, press and hold down F1, F2, or F3. The first selection wraps around to the last selection.

Saving changed options

You can save changed options in three ways:

•Use the SAVE function.

•Use the EXIT FROM SETUP function.

•Press the ONLINE or NEXT DISPLAY button.

USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-17