Fujitsu DL6400 manual Chr-Set, Italic, Graphic, Off, Prf-Skp, No-Skip, Width, ZEROFNT*2

DL6400/6600 Book Page 19 Friday, July 31, 1998 11:42 AM

Changing MENU1 and MENU2 Options

Table 8–3 MENU1 and MENU2 options (Continued)

MENU 1 or MENU2 Options	Description
item

<CHR-SET>	SET 1	IBM character set 1
	SET 2	IBM character set 2
		If a downloaded (soft) font is used, the character set for
		that font overrides the <CHR-SET> setting.
	*3
	ITALIC	Italic characters possible
	GRAPHIC	Graphics characters (ruled lines) possible
<AGM>*4	OFF	Specifies that alternate graphics mode (AGM) is off.
		The unit of line spacing is 1/72 or 1/216 of an inch.
	ON	Specifies that alternate graphics mode (AGM) is on.
		The unit of line spacing is 1/60 or 1/180 of an inch.
<PRF-SKP>		For continuous forms, specifies whether an inch is
		skipped over the perforation. If not using software to
		specify a bottom margin, select SKIP when using thick
		multipart forms.
	SKIP	One inch is skipped over the perforation.
	NO-SKIP	The perforation is not skipped. Printing continues in
		the bottom margin of the page.
<WIDTH>	13.6 IN	13.6-inch page width
	11.4 IN	11.4-inch page width
	11.0 IN	11-inch page width
	8.0 IN	8-inch page width
<ZEROFNT>*2		Specifies whether the number zero is printed with a
		slash. The slash is useful for distinguishing the capital
		letter “O” from the number “0.”
		This setting is invalid for some software fonts.
	NO-SLSH	0
	SLASH	Ø

SETUP MODE

User’s Manual 8-19