4-2. STANDARD CMOS SETUP
The <Standard CMOS Setup> option allows you to record some basic system hardware configurations and set the system clock and error handling. If the CPU board is already installed in a working system, you will not need to select this option anymore.
AMIBIOS SETUP - STANDARD CMOS SETUP
(C) 1999 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yyyy): Tue Jun 02,1998 |
| 640KB |
| |||
Time (hh/mm/ss): 13:39:30 |
| 63MB |
| |||
Floppy Drive A: | 1.44MB 3 1/2 |
|
|
|
| |
Floppy Drive B: | Not Installed | LBA | Blk | PIO | 32Bit | |
|
|
| ||||
| Type | Size Cyln Head Wpcom Sec Mode Mode Mode Mode | ||||
Pri Master | : Auto |
| Off | Off | Auto | Off |
Pri Slave | : Auto |
| Off | Off | Auto | Off |
Sec Master Auto |
| Off | Off | Auto | Off | |
Sec Slave | Auto |
| Off | Off | Auto | Off |
Boot Sector Virus Protection Disabled |
|
|
|
| ||
|
|
|
| |||
Month: Jan - Dec | ESC:Exit | :Sel |
| |||
Day: 01 - 31 |
| PgUp/PgDn:Modify |
| |||
Year: 1901 - 2099 | F2/F3:Color |
|
|
| ||
|
|
|
|
|
|
|
BIOS: Standard CMOS Setup
Date & Time Setup
Highlight the <Date> field and then press the [Page Up] /[Page Down] or
Highlight the <Time> field and then press the [Page Up] /[Page Down] or
The user can bypass the date and time prompts by creating an AUTOEXEC.BAT file. For information on how to create this file, please refer to the
Floppy Setup
The <Standard CMOS Setup> option records the types of floppy disk drives installed in the system.
To enter the configuration value for a particular drive, highlight its corresponding field and then select the drive type using the
Hard Disk Setup
The BIOS supports various types for user settings, The BIOS supports <Pri Master> and <Pri Slave> so the user can install up to two hard disks. For the master and slave jumpers, please refer to the hard disk’s installation descriptions and the hard disk jumper settings.
You can select <AUTO> under the <TYPE> and <MODE> fields. This will enable auto detection of your IDE drives during bootup. This will allow you to change your hard drives (with the power off) and then power on without having to reconfigure your hard drive type. If you use older hard disk drives which do not support this feature, then you must configure the hard disk drive in the standard method as described above by the <USER> option.
Boot Sector Virus Protection
This option protects the boot sector and partition table of your hard disk against accidental modifications. Any attempt to write to them will cause the system to halt and display a warning message. If this occurs, you can either allow the operation to continue or use a bootable
~耟Page 30 ~
