4-6. PCI/PLUG AND PLAY
This section is used to configure PCI / Plug and Play features. The <PCI & PNP Setup> option configures the PCI bus slots. All PCI bus slots on the system use INTA#, thus all installed PCI cards must be set to this value.
AMIBIOS SETUP - PCI/PLUG AND PLAY SETUP
(C) 1998 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S | Yes |
Clear NVRAM | No |
On board PCI LAN Controller | Enabled |
PCI Latency Timer (PCI Clocks) | 64 |
Primary Graphic Adapter | PCI |
PCI VGA Palette Snoop | Disabled |
PCI IDE BusMaster | Disabled |
PCI Slot1 IRQ Priority | Auto |
PCI Slot2 IRQ Priority | Auto |
PCI Slot3 IRQ Priority | Auto |
PCI Slot4 IRQ Priority | Auto |
DMA Channel 0 | PnP |
DMA Channel 1 | PnP |
DMA Channel 3 | PnP |
DMA Channel 5 | PnP |
DMA Channel 6 | PnP |
DMA Channel 7 | PnP |
IRQ 3 | ISA/EISA |
IRQ 4 | ISA/EISA |
IRQ 5 | PCI /PnP |
IRQ 7 | ISA/EISA |
IRQ 9 | PCI /PnP |
IRQ 10 | PCI /PnP |
IRQ 11 | PCI /PnP |
IRQ 12 | PCI /PnP |
IRQ 14 | PCI /PnP |
IRQ 15 | PCI /PnP |
Reserved Memory Size | 32K |
Reserved Memory Address | CC000 |
Available Options :
Yes
No
ESC:Exit :Sel
PgUp/PgDn:Modify
F2/F3:Color
BIOS: PCI / Plug and Play Setup
Plug and Play Aware O/S
Set this option to <No> if the operating system installed in the computer is Plug and
Clear NVRAM
This sets the operating mode of the boot block area of the BIOS FLASH ROM to allow programming in the Yes setting.
On board PCI LAN Controller
This option is to activate the PNP(Plug & Play) function of LAN.
PCI Latency Timer (PCI Clocks)
This option sets latency of all PCI devices on the PCI bus. The settings are in units equal to PCI clocks.
Primary Graphic Adapter
This option is set to use PCI bus or AGP. The AGP mode will get system a faster processing speed.
~耟Page 38 ~
