Suspend Time Out(minute)
These options specify the length of the period of system inactivity when the computer is already in Standby mode before the computer is placed on Suspend mode. In Suspend mode, nearly all power use is curtailed.
Throttle Slow Clock Ratio
This item is to set up the Operating Frequency of system clock in power saving mode, to set a suitable clock frequency ratio which between standard CPU clock and CPU clock in power saving mode when the system is in suspend mode.
Modem Use IO Port
To chose a suitable IO Port in this option.
Modem use IRQ
To chose the IRQ Signal.
Device
These options enable event monitoring. When the computer is in a power saving mode, activity on the named interrupt request line is monitored by BIOS. When any activity occurs, the computer enters Full On mode.
System Thermal
If the choice <monitor>is chose, the system will alarm when the system temperature is beyond the critical temperature.
Thermal Slow Clock Ratio
This item is to set up the Operating Frequency of system clock in power saving mode, to set a suitable clock frequency ratio which between standard CPU clock and CPU clock in power saving mode when the temperature is beyond the critical temperature.
Restore on AC/Power Loss
This item is to set up the system will restore with the last setting after the AC\Power Loss.
Ring Resume From Soft Off
This item is set up to awake the system from suspend mode and a ring bell while any access coming from modem.
Lan Resume From Soft Off
This item is set up to awake the system from suspend mode when encounter a network access, the function will be available if system is fixed with an Ethernet card.
~ Page 37 ~
