Curtis AR-B1682 operation manual Peripheral Setup

4-7. PERIPHERAL SETUP

This section is used to configure the peripheral features.

AMIBIOS SETUP - PCI/PLUG AND PLAY SETUP

(C) 1998 American Megatrends, Inc. All Rights Reserved

Plug and Play Aware O/S	Yes
Clear NVRAM	No
On board PCI LAN Controller	Enabled
PCI Latency Timer (PCI Clocks)	64
Primary Graphic Adapter	PCI
PCI VGA Palette Snoop	Disabled
PCI IDE BusMaster	Disabled
PCI Slot1 IRQ Priority	Auto
PCI Slot2 IRQ Priority	Auto
PCI Slot3 IRQ Priority	Auto
PCI Slot4 IRQ Priority	Auto
DMA Channel 0	PnP
DMA Channel 1	PnP
DMA Channel 3	PnP
DMA Channel 5	PnP
DMA Channel 6	PnP
DMA Channel 7	PnP
IRQ 3	ISA/EISA
IRQ 4	ISA/EISA
IRQ 5	PCI /PnP
IRQ 7	ISA/EISA
IRQ 9	PCI /PnP
IRQ 10	PCI /PnP
IRQ 11	PCI /PnP
IRQ 12	PCI /PnP
IRQ 14	PCI /PnP
IRQ 15	PCI /PnP
Reserved Memory Size	32K
Reserved Memory Address	CC000

Available Options :

Yes

No

ESC:Exit :Sel

PgUp/PgDn:Modify

F2/F3:Color

BIOS: Peripheral Setup

OnBoard FDC

This option enables the floppy drive controller on the AR-B1682.

OnBoard Serial Port

This option enables the serial port on the AR-B1682.

IR Port support

This item is to activate the function of Infra-red.

OnBoard Parallel Port

This option enables the parallel port on the AR-B1682.

Parallel Port Mode

This option specifies the parallel port mode. ECP and EPP are both bi-directional data transfer schemes that adhere to the IEEE1284 specifications.

Parallel Port DMA Channel

This option is only available if the setting for the parallel Port Mode option is ECP.

K/B Wake-Up function

This item is to set up the function of waking-up the system by Keyboard from suspend mode.

Mouse Wake-up function

This item is to set up the function of waking-up the system by Mouse from suspend mode.

~耟Page 40 ~