Checking the system operations (cont.)
Inserting the cassette tape
1 Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover. When the cover is fully opened, the cassette holder pops out automatically.
Cassette holder
OPEN/EJECT
1
Cassette cover
2 Insert the cassette tape.
4 Close the cassette cover after the cassette holder has been completely retracted.
4
O Do not take hold of the cassette cover alone to insert or remove tapes.
Insert and remove cassette tapes after putting the
O Do not forcibly push the cassette holder into place as this may cause malfunctioning.
O Wait until the cassette holder is completely retracted before closing the cassette cover.
Turning on the power
2
3 Press the part marked “PUSH” and close the cassette holder.
When the holder is closed properly, the cassette holder is retracted automatically.
3
CAMERA
VCR
POWER
FF | ON M | O |
O |
| DE |
POWER lever
Hold down the white button and turn the POWER lever to the ON position.
The CAMERA (red) lamp lights, and the
12 (E)