Panasonic AG-DVC30 specifications Other Functions screen, 78 E

Menu configuration (cont.)

DISPLAY SETUP screen

Item/
(Display	Description of settings
mode)
LCD/EVF SET	Use this to adjust the display level of the
(CAMERA)	images appearing in the viewfinder or on
(VCR)	the LCD monitor.
	LCD BRIGHTNESS:
	Select this to adjust the brightness of the
	images on the LCD monitor.
	LCD COLOUR LEVEL:
	Select this to adjust the colour level of
	the images on the LCD monitor.
	EVF BRIGHTNESS:
	Select this to adjust the brightness of the
	images in the viewfinder.
SELF SHOOT	When MIRROR is selected, an image with
(CAMERA)	the left and right sides reversed will appear
	on the LCD monitor when shooting a self-
	portrait.
	NORMAL, MIRROR
EVF MODE	Use this to select to switch the screen
(CAMERA)	images.
(VCR)	ON:
	The images are always displayed in the
	viewfinder.
	AUTO:
	The images in the viewfinder are cleared
	when the LCD monitor is opened.
EVF COLOUR	Select ON to display the images on the
(CAMERA)	viewfinder screen in colour.
(VCR)	OFF:
	The images are displayed in black and
	white.
	ON:
	The images are displayed in colour.
EVF DETAIL	When ON is selected, the contours of the
(CAMERA)	images in the viewfinder and on the LCD
(VCR)	monitor are emphasized to make focusing
	easier.
	However, the images recorded will be
	normal images without emphasized
	contours.
	OFF, ON

OTHER FUNCTIONS screen

Item/
(Display		Description of settings
mode)
REMOTE	Use this to set the operations to be
(CAMERA)	performed using the accessory remote
(VCR)	control unit. (P24)
	VCR1:
	Operations performed using the remote
	control unit which has been set up for
	use with VCR1 are accepted.
	VCR2:
	Operations performed using the remote
	control unit which has been set up for
	use with VCR2 are accepted.
	OFF:
	No operations performed using a remote
	control unit are accepted.
DV CONTROL	Use this to set the control method to be
(CAMERA)	used when a backup unit is connected to
	the DV connector and backup recording is
	to be performed.
	OFF:
	The backup unit is not controlled.
	EXT:
	The backup unit is controlled using the
	camera-recorder’s START/STOP button.
	The images shot using the camera-
	recorder are recorded using the backup
	unit. (The camera-recorder does not
	perform the recording operation.)
	BOTH:
	The images shot using the camera-
	recorder are recorded by both the
	camera-recorder and the backup unit.
	CHAIN:
	When the camera-recorder’s tape
	approaches its end during shooting,
	recording is automatically started by the
	backup unit that has been waiting in the
	recording standby mode.
DV CMD SEL	Use this to set the recording operation to be
(CAMERA)	performed by the backup unit when the
	camera-recorder’s START/STOP button is
	pressed.
	REC_P:
	The	START/STOP	button	switches
	between recording and rec pause.
	STOP:
	The	START/STOP	button	switches
	between recording and stop.
	<Note>
	If the backup unit does not have a rec
	pause function, select STOP.
REC LAMP	Select ON to light the tally lamp during
(CAMERA)	shooting. (P83)
	OFF, ON

The underlining indicates the factory setting.

78 (E)