Camera Mode
Image Stabilizer Function
If the Camera Recorder might be shaken while recording, the camera shake in the image can be corrected.
OIf the Camera Recorder shakes too much, this function may not be able to stabilize images.
1 Press the [DIG.E.] Button @ until the [AUTO EIS] Indication appears.
To Cancel Image Stabilizer
Press the [DIG.E.] Button @ until the [AUTO EIS] Indication disappears.
OFor other notes concerning this item, see
@DIG.E.
AUTO EIS
Fade In/Out Functions
Fade In
Fade In brings out images and sounds gradually from a black screen at the beginning of a scene.
1 Keep pressing the [FADE] Button E during the Recording Pause Mode.
EFADE
OThe image fades out gradually.
2 When the image is completely gone, press the Recording Start/Stop Button a to start recording.
a 
3 Release the [FADE] Button E about 3 seconds after starting recording.
OThe image reappears gradually.
Fade Out
Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene.
1 Keep pressing the [FADE] Button E while recording.
EFADE
OThe image fades out gradually.
2 When the image is completely gone, press the Recording Start/Stop Button a to stop recording.
a 
3 Release the [FADE] Button E.
OThe still picture cannot fade in or fade out.
24