Index Search Functions
To facilitate searching of desired scene, this Camera Recorder automatically records index signals during recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded whenever still pictures are taken in Photoshot Mode.
Scene Index Signal
Scene Index Signals are automatically recorded when you start recording after inserting a Cassette.
OIf [SCENEINDEX] of [RECORDING SETUP] Sub- Menu on the [CAMERA FUNCTIONS]
INDEX
OIf the Camera Recorder is switched from the VCR Mode to Camera Mode or if the date and time is set before the start of recording, the index signal is not recorded.
$ Photoshot Index Search
1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [SEARCH] >> [PHOTO].
W.B/SHUTTER/IRIS
> PUSH
VOL/JOG
MENU
B
2 Press the [MENU] Button B.
3 Press the [9] Button or [:] Button l on the Remote Controller.
V–
C/REW PLAY FF/ B
STILL ADV PAUSE STILL ADV
INDEX STOP INDEX
ll
SELECT
OWith each press of the corresponding button, still pictures recorded in Photoshot Mode are searched.
OSounds are played back for approximately 4 seconds.
VCR Mode
$ Scene Index Search
1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [SEARCH] >> [SCENE].
2 Press the [MENU] Button B.
3 Press the [9] Button or [:] Button l on the Remote Controller.
OWhen the corresponding button is pressed once, the [S 1] Indication appears, and searching of the subsequent scene marked with an index signal starts. Each time the button is pressed after the start of Scene Index Search, the indication changes from [S 2] to [S 9], and the beginning of the scene corresponding to the selected number will be searched.
S 1
OUp to 9 scene numbers can be selected.
Continuous Index Search
If the [9] Button or the [:] Button l is pressed for 2 seconds or longer, search can be continued at
V–
C/REW PLAY FF/ B
x
STILL ADV PAUSE STILL ADV
INDEX STOP INDEX
v
SELECT
OFor other notes concerning this item, see
35