Preparation
Recording to a card
The unit can record still pictures or motion pictures to an SD card. To record to an SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
≥Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 26) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
Access lamp A
≥When this unit is accessing the SD card, the access lamp lights up.
1Open the SD card cover and insert (remove) the SD card into (from)
the card slot B.
≥One SD card can be inserted into each of the card slot 1 and the card slot 2.
≥Face the label side C in the direction shown in the illustration and press it straight in as far as it will go.
≥Press the centre of the SD card and then pull it straight out.
2 Securely close the SD card cover.
≥Securely close it until it clicks.
21
(ENG) VQT5D95