Section 1: Safety

5.Allow the engine to cool before storing in any enclosure.

6.Store gasoline in a cool, well- ventilated area, safely away from any spark- or flame-producing equipment.

7.Store gasoline only in an approved gasoline storage container, safely out of the reach of children.

8.Use only original equipment replacement parts. Parts manufactured by others could present a safety hazard even though they may fit on the unit.

9.Store the unit where children will not have access to it. Always disconnect the spark plug wire from the spark plug to prevent accidental starting. Remove the ignition key from the ignition keyswitch.

10.Check the tightness of the auger shear bolts and other fasteners at frequent intervals. Torque shear bolts to 11 ft. lbs. (15 Nm).

11.Maintain or replace safety and instruction decals as needed if they are damaged or illegible. Refer to the parts catalog for decal location and ordering information.

12.Refer to the engine owner manual for complete engine information.

Safety Decals

For your personal safety and the safety of others, a number of safety message decals have been affixed to your unit. Keep them clean and legible at all times. Contact your local service dealer or the factory for replacements if any decals are damaged or missing.

Refer to the separate parts catalog for decal locations, part numbers, and ordering instructions.

7

Page 7
Image 7
Troy-Bilt 42030, 42031, 42012, 42010 manual Safety Decals, Allow the engine to cool before storing in any enclosure